
Weber (Saint-Gobain) WaterproofingNo. 15 / 19
weberdry RBV Technical Data Sheet (TDS)
Waterproofing
weberdry RBV is a ready to use cold applied bitumen emulsion modified with SBR (Styrene Butadiene Rubber), to provide a tough durable and elastic coating. The cured film is weatherproof and resistant to aggressive ground salts.
- Waterproofing wet areas and roofs
- Protecting concrete from water ingress
Build a list across products and send it once, or ask about weberdry RBV on WhatsApp now.
- Class
- ASTM D 1227 Type III, Class1
- Consumption
- 0.4 to 300 kg/m²
- Pack we stock
- 200 l
About weberdry RBV
Single component, odorless, nonflammable and easy to apply tough impermeable film with good resistance to rupture during back filling. Excellent adhesion to concrete. Sufficient elasticity to accommodate small movements and hairline cracks. Suitable for application into damp surfaces. Asbestos free, it can be applied in cold and confined spaces. Resist attack from chloride and sulphate ions, excellent resistance to extreme of temperature, avoiding risk of f or embrittlement. Weber states it as ASTM D 1227 Type III, Class1. The sheet gives consumption as 2-2.5 m2/LT per coat (WFT per coat 400-500 microns; DFT per coat 240-300 microns). Lapiz Blue supplies weberdry RBV across the UAE from Dubai, Abu Dhabi and Sharjah.
Documentation
Related documentation
Technical data sheet
Revision 12.25 · 0.2 MB · PDF
weberdry RBV as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
How it is being applied
As published in the data sheet
12,000 to 15,000kg
- DFT per coat 240-300 microns): 240 to 300 kg/m2
- over 50 m2
Taken from the weberdry RBV data sheet: 2-2.5 m2/LT per coat (WFT per coat 400-500 microns; DFT per coat 240-300 microns). No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Waterproofing wet areas and roofs
- 02Protecting concrete from water ingress
Specification
Technical data.
- ASTM D 1227 Type III, Class1
- EN 14891
| Classification | ASTM D 1227 Type III, Class1 |
|---|---|
| Coverage | 2-2.5 m2/LT per coat (WFT per coat 400-500 microns; DFT per coat 240-300 microns) |
| Pack size | 200lit |
| Service temperature | +5°C to +85°C |
| Color | Brown thixotropic liquid, dries |
| Specific gravity | 1.00-1.05kg/lit |
| Solids content | Approx. 60% |
| Rubber content | 10% |
| Latex content in dry film | 10% min by pass |
| Elongation astm 412 | >600% |
| Drying time | 2 to 3 hours at 30°C |
| Recoat time | 4 hours min (this limit will |
| Licable standards | SAFETY PRECAUTIONS |
| M d 1227 type iii class1 | Avoid prolonged contact with skin. Wear protective gear for |
| Strate preparation | wash thoroughly with clean water. If swallowed, do not induce |
| Ess water before application | are beyond its control. It is recommended to verify with the |
| Dry | listed for guidance only. For more information, please contact |
| Ay | The information included on this Technical Data Sheet is the sole |
| Spaces | Latex content in dry film 10% min by pass |
| Or embrittlement | Drying time |
| Product type | Waterproofing |
Typical values as Weber (Saint-Gobain) prints them in the data sheet for weberdry RBV. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
200lit. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply weberdry RBV, a waterproofing manufactured by Weber (Saint-Gobain), classified ASTM D 1227 Type III, Class1. Waterproofing. Allow 0.4 to 300 kg/m2, as published by the manufacturer. Supplied in 200lit. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | weberdry RBV |
|---|---|
| Manufacturer | Weber (Saint-Gobain) |
| Type | Waterproofing |
| Classification | ASTM D 1227 Type III, Class1 |
| Consumption | 0.4 to 300 kg/m2 |
| Pack size | 200lit |
| Unit of measurement | m2 |
Frequently Asked Questions
weberdry RBV is classified ASTM D 1227 Type III, Class1 according to EN 14891, as stated in the manufacturer's technical data sheet.
As per the TDS: 2-2.5 m2/LT per coat (WFT per coat 400-500 microns; DFT per coat 240-300 microns)
200lit
You can download the official weberdry RBV technical data sheet as a PDF directly from this page, revision 12.25, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

weber Band
View TDS and specifications

weberdry 110 FX
View TDS and specifications

weberdry 116 FX
View TDS and specifications

weberdry 130 PR
View TDS and specifications

weberdry 136 FX
View TDS and specifications

weberdry 150 BLC
View TDS and specifications
All WaterproofingEvery Weber product and the distributor page
On the van
Tools for this job.

Keiser
Electric Paint Sprayers
Airless spray puts a liquid applied membrane down at an even film thickness over a large area.
View the range
Peygran
Cement Tools
Trowels and floats for the two coat cementitious slurry membranes.
View the range
Keiser
Grinders and Polishing
Grinding back to sound concrete and vacuuming it clean. A membrane is only as good as what it is stuck to.
View the range
weberdry RBV in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Weber (Saint-Gobain) from Dubai, Abu Dhabi and Sharjah. Send the quantity of weberdry RBV you need, or describe the job and we will work it out with you.