
Kerakoll PlasterNo. 01 / 23
Biocalce Fondo Technical Data Sheet (TDS)
Certified, eco-friendly, uniforming mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and selected inert materials
Biocalce Fondo is a certified mineral undercoat based on selected pure CL 90-S lime putty to EN 459-1, with selected inert materials, applied before a lime paint or lime finish. Its function is to make the wall uniform.
- Undercoat before natural lime paint
- Evening out absorbency on old plaster
- Breathable mineral decoration of restored walls
- Interior and exterior lime build ups
Build a list across products and send it once, or ask about Biocalce Fondo on WhatsApp now.
- Consumption
- 0.15 to 0.3 L/m²
- Pack we stock
- 14 l
About Biocalce Fondo
Old plaster absorbs unevenly, and a lime paint taken straight onto it dries at different rates across the surface and reads as patchiness that no second coat fully cures. The undercoat equalises that suction and gives the finish a consistent key. Lime putty keeps the layer vapour permeable and chemically the same as the lime work above and below it, which is the point of staying inside one material family. Supplied in 14 litre buckets with twelve months of shelf life. Stir thoroughly before use, because the inert content settles in the pail.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Biocalce Fondo as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
7.50 to 15.0litres
- Per single coat, as the sheet quotes it: 0.15 to 0.3 litre/m2
- 1 coat
- over 50 m2
Order 1 to 2 packs of 14 litre bucket
Taken from the Biocalce Fondo data sheet: Coverage Biocalce Fondo: approx. 0.15 to 0.3 l/m2 per single coat. No site allowance is added unless you turn one on. Used undiluted or diluted with water up to 10 percent in volume depending on porosity and degree of absorption. The sheet gives one range and does not split it by dilution.
Application
Where it is used.
- 01Undercoat before natural lime paint
- 02Evening out absorbency on old plaster
- 03Breathable mineral decoration of restored walls
- 04Interior and exterior lime build ups
Specification
Technical data.
- EN 998-1
| Coverage | 0.3 l/m2 |
|---|---|
| Pack size | 14 litre buckets |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | White paste |
| Storage and shelf life | 12 months |
| Product type | Certified, eco-friendly, uniforming mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and selected inert materials |
Typical values as Kerakoll prints them in the data sheet for Biocalce Fondo. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Fondo, a plaster manufactured by Kerakoll. Certified, eco-friendly, uniforming mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and selected inert materials. Allow 0.15 to 0.3 L/m2, as published by the manufacturer. Supplied in 14 litre buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Fondo |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 0.15 to 0.3 L/m2 |
| Pack size | 14 litre buckets |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.3 l/m2
14 litre buckets
You can download the official Biocalce Fondo technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications

Biocalce Intonaco
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Fondo in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Fondo you need, or describe the job and we will work it out with you.