
Kerakoll PlasterNo. 04 / 23
Biocalce Intonachino Fino Technical Data Sheet (TDS)
Breathable finishing product based on NHL 3.5 natural hydraulic lime for fine-grain finishing of conventional plasters/renders
For a fine grain finish over a conventional plaster, Biocalce Intonachino Fino is the breathable finishing product based on NHL 3.5 natural hydraulic lime. It is the last coat of a lime plaster system and it decides the texture the wall will read as, while leaving the build up vapour permeable from the masonry outwards.
- Fine grain finishing of conventional plasters and renders
- Final coat of a breathable lime plaster system
- Internal walls and smooth external elevations
- Older masonry that needs to dry through the finish
Build a list across products and send it once, or ask about Biocalce Intonachino Fino on WhatsApp now.
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 25 kg
About Biocalce Intonachino Fino
That permeability is the reason to choose lime over a cement skim on an older wall: moisture in the masonry can evaporate through the plaster instead of being trapped behind it and pushing the surface off. Fine grain suits internal walls and smooth elevations. Supplied in 25 kg bags with twelve months of shelf life. In UAE heat the lime has to be kept from drying too quickly, so shade and damp cure fresh work as the data sheet directs.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Intonachino Fino as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 5 mm.
As published in the data sheet
240kg
- 1.6 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 10 packs of 25 kg bag
Taken from the Biocalce Intonachino Fino data sheet: Coverage Biocalce Intonachino Fino: approx. 1.6 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Max thickness approx. 5 mm. The default is the middle of that range, not 1 mm.
Application
Where it is used.
- 01Fine grain finishing of conventional plasters and renders
- 02Final coat of a breathable lime plaster system
- 03Internal walls and smooth external elevations
- 04Older masonry that needs to dry through the finish
Specification
Technical data.
- EN 998-1
| Coverage | Biocalce Intonachino Fino: ≈ 1.6 kg/m² per mm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 9 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | Breathable finishing product based on NHL 3.5 natural hydraulic lime for fine-grain finishing of conventional plasters/renders |
Typical values as Kerakoll prints them in the data sheet for Biocalce Intonachino Fino. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 9 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Intonachino Fino, a plaster manufactured by Kerakoll. Breathable finishing product based on NHL 3.5 natural hydraulic lime for fine-grain finishing of conventional plasters/renders. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 9 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Intonachino Fino |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 1.6 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 9 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Intonachino Fino: ≈ 1.6 kg/m² per mm of thickness
25 kg bags
You can download the official Biocalce Intonachino Fino technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications

Biocalce Intonaco
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Intonachino Fino in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Intonachino Fino you need, or describe the job and we will work it out with you.