Kerakoll logo

Kerakoll Biocalce, lime plasters for masonry that has to breathe

Biocalce is natural hydraulic lime, not cement, and that difference decides where it belongs. Lime is vapour permeable and slightly flexible, so moisture moves out through the plaster rather than being trapped behind it, and the plaster stays softer than the masonry it sits on. Cement does the opposite: it traps moisture and is harder than old masonry, which is why cement render on a historic wall pushes salts and damage back into the substrate. The range covers base coats, bedding mortars, fine finishes and mineral paints as one system. Lapiz Blue supplies it from Dubai, Abu Dhabi and Sharjah.

Visit Kerakoll Official Website
Plasters and Masonry - Image 1

The range. All 23.

Where it is used

1

Plastering and rendering masonry that needs to stay vapour permeable

2

Restoration and conservation work on older buildings

3

Bedding mortars for stone and brick

4

Fine finish coats and decorative lime finishes

5

Mineral silicate paints over lime substrates

6

Walls where salts or rising damp are present

How to choose

1

Decide lime or cement first. On old or damp masonry, lime is usually the correct answer.

2

Build the system from one family. A lime base under a cement finish defeats the point.

3

Match the finish grain to the look you want, from coarse base to fine skim.

4

Use a mineral paint over lime, not a plastic film paint, or the wall stops breathing.

5

Allow lime its curing time. It carbonates slowly and will not be hurried.

6

Protect fresh work from direct sun and wind, which matter more here than in Europe.

Common mistakes to avoid

  • Finishing a lime plaster with an acrylic paint, which seals in the moisture it was chosen to release.
  • Applying a cement base coat under a lime finish.
  • Rushing the cure, or applying in full sun without protection.
  • Treating lime as a cosmetic choice when it is a technical one.

What you can expect

Authorisation

Supplied as an authorised Kerakoll distributor in the UAE

Coverage

Supplied from Dubai, Abu Dhabi and Sharjah, UAE wide delivery

Documentation

Technical data sheets hosted on every product page

Technical guidance

Product selection against substrate, exposure and site conditions

Quotations

BOQ based quotations with practical alternatives where an item is on order

Range

105 Kerakoll products across six product groups

Frequently Asked Questions

Lime is vapour permeable and stays softer than the masonry behind it. Moisture passes out through the plaster instead of being trapped, and the plaster yields rather than cracking the substrate. Cement does neither, which is why it damages older masonry over time. On modern blockwork a cementitious plaster is usually the right choice; on old or damp masonry, lime is.

Not if you want the wall to keep breathing. A conventional film forming paint seals the surface and undoes the reason lime was specified. Use a mineral silicate paint, which bonds chemically with the lime and stays permeable. Kerakoll supply those in the same range.

Yes, with care during application. Lime cures by carbonation rather than by hydration, and high temperature and wind can dry it before that gets going. Apply outside the hottest hours and protect fresh work. The payoff is a wall that handles salt and moisture better than cement does.

Need a recommendation or a quotation for lime plasters and masonry products?

Send your project details on WhatsApp or by email and we will come back the same day.

Share these details for a quick response:

  • The substrate: old masonry, stone, brick or modern block
  • Whether damp or salts are present
  • Internal or external, and the total wall area
  • The finish and texture you want
  • Whether the wall will be painted, and with what
  • City and the date you need it on site
Chat on WhatsApp