
Kerakoll PlasterNo. 16 / 23
Biocalce Zoccolatura Technical Data Sheet (TDS)
WTA-certified dehumidifying plaster/render based on NHL 3.5 natural hydraulic lime for restoring masonry
Biocalce Zoccolatura is a WTA certified dehumidifying plaster based on NHL 3.5 natural hydraulic lime, made for restoring masonry affected by damp. A dehumidifying plaster is not a waterproofer.
- Dehumidifying plaster on damp affected masonry
- Restoring ground floor and plinth level walls
- Salt affected masonry where cement render has failed
- Work specified to the WTA restoration standard
Build a list across products and send it once, or ask about Biocalce Zoccolatura on WhatsApp now.
- Consumption
- 1.2 kg/m² per mm
- Pack we stock
- 25 kg
About Biocalce Zoccolatura
It is deliberately porous, so that moisture rising through a wall evaporates within the thickness of the plaster and the salts it carries crystallise inside the pore structure rather than on the finished face. Blocking the damp instead, with a cement render or a tanking coat, only moves it higher up the wall. WTA certification is the German restoration standard for exactly this behaviour. Supplied in 25 kg bags with twelve months of shelf life. It goes over a rough coat and has to be built as a system, because a dehumidifying plaster finished with a dense skim stops working.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Zoccolatura as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 20 to 40 mm.
As published in the data sheet
1,200kg
- 1.2 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 48 packs of 25 kg bag
Taken from the Biocalce Zoccolatura data sheet: Coverage Biocalce Zoccolatura: approx. 12 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes 12 kg/m2 per centimetre, divided by 10 here. Minimum thickness obtainable is approx. 2 cm and the maximum by coat is approx. 2 cm, so anything thicker is built in layers.
Application
Where it is used.
- 01Dehumidifying plaster on damp affected masonry
- 02Restoring ground floor and plinth level walls
- 03Salt affected masonry where cement render has failed
- 04Work specified to the WTA restoration standard
Specification
Technical data.
- EN 998-1
| Coverage | Biocalce Zoccolatura: ≈ 12 kg/m² per cm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.3 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | WTA-certified dehumidifying plaster/render based on NHL 3.5 natural hydraulic lime for restoring masonry |
Typical values as Kerakoll prints them in the data sheet for Biocalce Zoccolatura. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 5.3 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Zoccolatura, a plaster manufactured by Kerakoll. WTA-certified dehumidifying plaster/render based on NHL 3.5 natural hydraulic lime for restoring masonry. Allow 1.2 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 5.3 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Zoccolatura |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 1.2 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.3 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Zoccolatura: ≈ 12 kg/m² per cm of thickness
25 kg bags
You can download the official Biocalce Zoccolatura technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Zoccolatura in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Zoccolatura you need, or describe the job and we will work it out with you.