Keraplast P6 plaster pack
Kerakoll's own picture. The pack we stock: 1 kg.

Kerakoll PlasterNo. 17 / 23

Keraplast P6 Technical Data Sheet (TDS)

Latex for mineral mortars and slurry keys

Keraplast P6 is a latex for mineral mortars and slurry keys, added to the mixing water rather than applied as a layer of its own. Its job is adhesion and cohesion.

  • Gauging slurry keys on smooth dense substrates
  • Modifying mineral mortars for better adhesion
  • Improving cohesion in site mixed repair work
  • Small area and patch repairs
Data sheet0.3 MB

Build a list across products and send it once, or ask about Keraplast P6 on WhatsApp now.

Pack we stock
1 kg
Colour
white liquid

About Keraplast P6

A slurry key gauged with latex grips a smooth dense substrate that a plain cement slurry would simply sit on, and a mineral mortar modified with it bonds better to the surrounding material. Because it changes the mortar rather than coating the wall, the dose follows the mortar being modified, so take it from the data sheet for the mix being gauged rather than by eye. Supplied in 1 kg cans with twelve months of shelf life, a size that suits site repairs and small areas. On a hot UAE site, latex gauged mixes stiffen quickly, so gauge only what the gang can place.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Keraplast P6 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

A latex additive, not an area product. The sheet doses it at approx. 10 to 30 percent of the weight of the cement, and for a slurry key at 1 part Keraplast P6 to 1 part water to 2.5 parts cement.

There is no area calculator for Keraplast P6 because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Gauging slurry keys on smooth dense substrates
  2. 02Modifying mineral mortars for better adhesion
  3. 03Improving cohesion in site mixed repair work
  4. 04Small area and patch repairs

Specification

Technical data.

  • EN 998-1
Keraplast P6 technical specifications from the manufacturer TDS
Pack size1 kg cans
Colourswhite liquid
Application temperature+5 deg C to +35 deg C
Consistencywhite liquid
Storage and shelf life12 months
Product typeLatex for mineral mortars and slurry keys

Typical values as Kerakoll prints them in the data sheet for Keraplast P6. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 kg cans. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keraplast P6, a plaster manufactured by Kerakoll. Latex for mineral mortars and slurry keys. Supplied in 1 kg cans. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keraplast P6
ProductKeraplast P6
ManufacturerKerakoll
TypePlaster
Pack size1 kg cans
Unit of measurementm2

Frequently Asked Questions

1 kg cans

You can download the official Keraplast P6 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keraplast P6 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keraplast P6 you need, or describe the job and we will work it out with you.

Chat on WhatsApp