
Kerakoll PlasterNo. 05 / 23
Biocalce Intonachino Granello Technical Data Sheet (TDS)
Breathable finishing product based on NHL 3.5 natural hydraulic lime for medium-grain finishing of conventional plasters/renders
Biocalce Intonachino Granello is the medium grain version of the NHL 3.5 natural hydraulic lime finishing product, applied as the final coat over a conventional plaster or render. Grain size is a practical choice as well as a visual one.
- Medium grain finishing of conventional plasters and renders
- Large external elevations where a fine finish shows variation
- Final coat of a breathable lime plaster system
- Restoration work on older masonry
Build a list across products and send it once, or ask about Biocalce Intonachino Granello on WhatsApp now.
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 25 kg
About Biocalce Intonachino Granello
A coarser finish hides small irregularities in the coat beneath and reads as less flat under raking light, which is why it is often preferred on larger external elevations where a fine finish would show every variation in the plane. The lime binder keeps the surface breathable, so moisture in the wall can still escape through it rather than collecting behind. Supplied in 25 kg bags with twelve months of shelf life. Protect fresh work from direct sun and wind, because lime that dries before it has properly carbonated ends up weak and dusty.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Intonachino Granello as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 1 to 10 mm.
As published in the data sheet
375kg
- 1.5 kg/m2 per mm
- 5 mm thick
- over 50 m2
Order 15 packs of 25 kg bag
Taken from the Biocalce Intonachino Granello data sheet: Coverage Biocalce Intonachino Granello approx. 1.5 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. Max thickness approx. 10 mm. The default is the middle of that range.
Application
Where it is used.
- 01Medium grain finishing of conventional plasters and renders
- 02Large external elevations where a fine finish shows variation
- 03Final coat of a breathable lime plaster system
- 04Restoration work on older masonry
Specification
Technical data.
- EN 998-1
| Coverage | Biocalce Intonachino Granello ≈ 1.5 kg/m² per mm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 8 l / 1 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | Breathable finishing product based on NHL 3.5 natural hydraulic lime for medium-grain finishing of conventional plasters/renders |
Typical values as Kerakoll prints them in the data sheet for Biocalce Intonachino Granello. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 8 l / 1 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Intonachino Granello, a plaster manufactured by Kerakoll. Breathable finishing product based on NHL 3.5 natural hydraulic lime for medium-grain finishing of conventional plasters/renders. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 8 l / 1 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Intonachino Granello |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 1.5 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 8 l / 1 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Intonachino Granello ≈ 1.5 kg/m² per mm of thickness
25 kg bags
You can download the official Biocalce Intonachino Granello technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications

Biocalce Intonaco
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Intonachino Granello in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Intonachino Granello you need, or describe the job and we will work it out with you.