
Kerakoll PlasterNo. 07 / 23
Biocalce Intonaco Technical Data Sheet (TDS)
WTA-certified, plaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering
Biocalce Intonaco is a WTA certified plaster based on NHL 3.5 natural hydraulic lime for highly breathable plastering and rendering. This is the body coat of a lime system, the layer that gives a wall its thickness and its plane.
- Highly breathable plastering and rendering of masonry
- Body coat of a lime plaster system
- Restoration of old stone and brick walls
- Work specified to the WTA restoration standard
- Walls where cement render would trap damp
Build a list across products and send it once, or ask about Biocalce Intonaco on WhatsApp now.
- Consumption
- 1.3 kg/m² per mm
- Pack we stock
- 25 kg
About Biocalce Intonaco
Lime behaves differently to cement on old masonry, and that is the reason to specify it. It is vapour permeable, so damp in the wall evaporates through the plaster, and it is softer than the masonry, so movement is taken up in the plaster rather than cracking the stone or brick behind it. Cement does the opposite on both counts. WTA certification is the German restoration standard. Supplied in 25 kg bags with twelve months of shelf life. Dampen absorbent masonry before applying, particularly on a summer site where the wall is already hot.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Intonaco as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 10 to 20 mm.
As published in the data sheet
975kg
- 1.3 kg/m2 per mm
- 15 mm thick
- over 50 m2
Order 39 packs of 25 kg bag
Taken from the Biocalce Intonaco data sheet: Coverage Biocalce Intonaco: approx. 13 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes 13 kg/m2 per centimetre, divided by 10 here to give 1.3 kg/m2 per millimetre. Maximum thickness obtainable by coat is approx. 2 cm, so a thicker render is built in layers.
Application
Where it is used.
- 01Highly breathable plastering and rendering of masonry
- 02Body coat of a lime plaster system
- 03Restoration of old stone and brick walls
- 04Work specified to the WTA restoration standard
- 05Walls where cement render would trap damp
Specification
Technical data.
- EN 998-1
| Coverage | Biocalce Intonaco: ≈ 13 kg/m² per cm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.1 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | WTA-certified, plaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering |
Typical values as Kerakoll prints them in the data sheet for Biocalce Intonaco. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 5.1 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Intonaco, a plaster manufactured by Kerakoll. WTA-certified, plaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering. Allow 1.3 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 5.1 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Intonaco |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 1.3 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 5.1 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Intonaco: ≈ 13 kg/m² per cm of thickness
25 kg bags
You can download the official Biocalce Intonaco technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Intonaco in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Intonaco you need, or describe the job and we will work it out with you.