Biocalce Intonaco Fino plaster pack
Kerakoll's own picture. The pack we stock: 25 kg.

Kerakoll PlasterNo. 08 / 23

Biocalce Intonaco Fino Technical Data Sheet (TDS)

Plaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering

Biocalce Intonaco Fino is a plaster based on NHL 3.5 natural hydraulic lime for highly breathable plastering and rendering, the finer grade of the lime body coat. Where the standard grade builds thickness, the fine grade suits thinner applications and surfaces that need a closer texture before the finishing coat goes on, which means fewer passes to get from masonry to finish on a wall that is already reasonably true.

  • Highly breathable plastering and rendering in thinner coats
  • Walls already close to true that need a closer texture
  • Restoration of old masonry in a lime build up
  • Base for a lime finishing coat
Data sheet0.3 MB

Build a list across products and send it once, or ask about Biocalce Intonaco Fino on WhatsApp now.

Consumption
1.2 kg/m² per mm
Pack we stock
25 kg

About Biocalce Intonaco Fino

The lime binder gives the same vapour permeability and the same compatibility with old masonry: moisture leaves the wall rather than being trapped, and the plaster stays softer than the substrate it covers. Supplied in 25 kg bags with twelve months of shelf life. Mix only what can be used, and keep fresh work out of direct sun while it cures.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Biocalce Intonaco Fino as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 10 to 20 mm.

As published in the data sheet

900kg

  • 1.2 kg/m2 per mm
  • 15 mm thick
  • over 50 m2

Order 36 packs of 25 kg bag

Send this quantity for a quote

Taken from the Biocalce Intonaco Fino data sheet: Coverage Biocalce Intonaco Fino: approx. 12 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes 12 kg/m2 per centimetre, divided by 10 here to give 1.2 kg/m2 per millimetre. Maximum thickness obtainable by coat is approx. 2 cm.

Application

Where it is used.

  1. 01Highly breathable plastering and rendering in thinner coats
  2. 02Walls already close to true that need a closer texture
  3. 03Restoration of old masonry in a lime build up
  4. 04Base for a lime finishing coat

Specification

Technical data.

  • EN 998-1
Biocalce Intonaco Fino technical specifications from the manufacturer TDS
CoverageBiocalce Intonaco Fino: ≈ 12 kg/m² per cm of thickness
Pack size25 kg bags
Mixing ratio≈ 5.5 l / 1 x 25 kg bag
Application temperature+5 deg C to +35 deg C
Storage and shelf life12 months
Product typePlaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering

Typical values as Kerakoll prints them in the data sheet for Biocalce Intonaco Fino. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

≈ 5.5 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Biocalce Intonaco Fino, a plaster manufactured by Kerakoll. Plaster/render based on NHL 3.5 natural hydraulic lime for highly breathable plastering/rendering. Allow 1.2 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 5.5 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Biocalce Intonaco Fino
ProductBiocalce Intonaco Fino
ManufacturerKerakoll
TypePlaster
Consumption1.2 kg/m2 per mm
Pack size25 kg bags
Mixing ratio≈ 5.5 l / 1 x 25 kg bag
Unit of measurementm2

Frequently Asked Questions

As per the TDS: Biocalce Intonaco Fino: ≈ 12 kg/m² per cm of thickness

25 kg bags

You can download the official Biocalce Intonaco Fino technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Biocalce Intonaco Fino in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Intonaco Fino you need, or describe the job and we will work it out with you.

Chat on WhatsApp