
Kerakoll PlasterNo. 02 / 23
Biocalce Fondo Universale Technical Data Sheet (TDS)
Certified, eco-friendly, uniforming, universal mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and natural, micronized casein
The universal grade of the lime undercoat, Biocalce Fondo Universale is based on selected pure CL 90-S lime putty to EN 459-1 and contains natural micronised casein. Casein is a traditional binder, and it is what widens the range of surfaces this coat will hold on.
- Universal undercoat before lime paints and fine plasters
- Substrates that pure lime grips poorly
- Renovation work over existing wall finishes
- Breathable mineral decoration schemes
Build a list across products and send it once, or ask about Biocalce Fondo Universale on WhatsApp now.
- Consumption
- 0.15 to 0.25 L/m²
- Pack we stock
- 14 l
- Colour
- . Lime putty
About Biocalce Fondo Universale
Universal means it can be taken over substrates that pure lime alone grips poorly, which in practice is often what decides whether a lime finish can be used on an existing wall at all. Beyond that it does the same work as the standard undercoat, evening out absorbency so the lime paint or fine plaster above dries uniformly, and leaving the layer vapour permeable. Shelf life is twelve months. Check the existing finish before specifying it, because a sound mineral surface remains the condition for success.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Biocalce Fondo Universale as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
7.50 to 12.5litres
- Per coat, as the sheet quotes it: 0.15 to 0.25 litre/m2
- 1 coat
- over 50 m2
Order 1 pack of 14 litre bucket
Taken from the Biocalce Fondo Universale data sheet: Coverage approx. 0.15 to 0.25 l/m2. No site allowance is added unless you turn one on. The technical table gives 0.15 to 0.25 l/m2 while the abstract on the same sheet states a flat 0.25 l/m2. The table range is used here. The product may be diluted up to 20 percent by volume with clean water according to the porosity of the support.
Application
Where it is used.
- 01Universal undercoat before lime paints and fine plasters
- 02Substrates that pure lime grips poorly
- 03Renovation work over existing wall finishes
- 04Breathable mineral decoration schemes
Specification
Technical data.
- EN 998-1
| Coverage | 0.25 l/m2 |
|---|---|
| Pack size | 14 litre |
| Colours | . Lime putty |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | White liquid |
| Storage and shelf life | 12 months |
| Product type | Certified, eco-friendly, uniforming, universal mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and natural, micronized casein |
Typical values as Kerakoll prints them in the data sheet for Biocalce Fondo Universale. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Fondo Universale, a plaster manufactured by Kerakoll. Certified, eco-friendly, uniforming, universal mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and natural, micronized casein. Allow 0.15 to 0.25 L/m2, as published by the manufacturer. Supplied in 14 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Fondo Universale |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 0.15 to 0.25 L/m2 |
| Pack size | 14 litre |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.25 l/m2
14 litre
You can download the official Biocalce Fondo Universale technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications

Biocalce Intonaco
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Fondo Universale in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Fondo Universale you need, or describe the job and we will work it out with you.