
Kerakoll PlasterNo. 15 / 23
Biocalce Tinteggio Technical Data Sheet (TDS)
Certified, eco-friendly, natural wall paint based on selected pure CL 90-S lime putty compliant with EN 459-1 and and naturally coloured pigments
Biocalce Tinteggio is a certified natural wall paint based on selected pure CL 90-S lime putty to EN 459-1 with naturally coloured pigments. Lime paint is the correct top coat for a lime plaster, and the reason is compatibility.
- Breathable top coat over lime plasters
- Decoration of restored masonry interiors
- Natural mineral paint for heritage work
- Walls where an emulsion would trap moisture
Build a list across products and send it once, or ask about Biocalce Tinteggio on WhatsApp now.
- Consumption
- 0.2 to 0.3 L/m²
- Pack we stock
- 14 l
About Biocalce Tinteggio
It stays vapour permeable, so the moisture that a lime plaster is specified to let out is not stopped at the last fraction of a millimetre by a plastic film. A conventional emulsion over lime plaster traps that moisture and then blisters. Lime paint also carbonates into the surface rather than sitting on it. It works over lime plasters and the matching lime undercoat. Shelf life is twelve months. Expect the slight variation in tone that lime paint gives, which is part of the finish, and coat whole elevations in one go.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Biocalce Tinteggio as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0 to 15.0litres
- Two coats, as the sheet quotes it: 0.2 to 0.3 litre/m2
- over 50 m2
Order 1 to 2 packs of 14 litre bucket
Taken from the Biocalce Tinteggio data sheet: Coverage per m2 on support finished with Biocalce Intonachino Fino: approx. 0.2 to 0.3 l/m2 for two coats. No site allowance is added unless you turn one on. The figure already covers two coats, so do not multiply it by a coat count. The first coat is diluted with clean water to a maximum of 40 percent by volume and the second to a maximum of 20 percent. The abstract on the same sheet states a flat 0.3 l/m2 for two coats.
Application
Where it is used.
- 01Breathable top coat over lime plasters
- 02Decoration of restored masonry interiors
- 03Natural mineral paint for heritage work
- 04Walls where an emulsion would trap moisture
Specification
Technical data.
- EN 998-1
| Coverage | Biocalce Tinteggio: ≈ 0.3 l/m² for two coats. |
|---|---|
| Pack size | 14 litre |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | Natural lime putty |
| Storage and shelf life | 12 months |
| Product type | Certified, eco-friendly, natural wall paint based on selected pure CL 90-S lime putty compliant with EN 459-1 and and naturally coloured pigments |
Typical values as Kerakoll prints them in the data sheet for Biocalce Tinteggio. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Tinteggio, a plaster manufactured by Kerakoll. Certified, eco-friendly, natural wall paint based on selected pure CL 90-S lime putty compliant with EN 459-1 and and naturally coloured pigments. Allow 0.2 to 0.3 L/m2, as published by the manufacturer. Supplied in 14 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Tinteggio |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 0.2 to 0.3 L/m2 |
| Pack size | 14 litre |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Tinteggio: ≈ 0.3 l/m² for two coats.
14 litre
You can download the official Biocalce Tinteggio technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Tinteggio in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Tinteggio you need, or describe the job and we will work it out with you.