Kerakoll logo

Kerakoll mineral finishes, which stay breathable

A mineral silicate paint is not a film laid on top of a wall. It reacts with a mineral substrate and becomes part of it, which is why it stays vapour permeable where a conventional paint seals the surface. That matters on lime plaster, on masonry carrying moisture, and on any wall where trapping damp behind a coating would push the problem back into the substrate. The range covers consolidants for weak surfaces, silicate primers and pure silicate paints. Lapiz Blue supplies it from Dubai, Abu Dhabi and Sharjah.

Visit Kerakoll Official Website
Surface Treatments and Finishes - Image 1

The range. All 6.

Where it is used

1

Painting lime plaster and mineral renders

2

Consolidating weak or friable masonry surfaces

3

Restoration work where breathability is specified

4

External elevations exposed to sun and salt

5

Any wall where a film forming paint would trap moisture

How to choose

1

Confirm the substrate is mineral. Silicate paint needs something to react with.

2

Consolidate first where the surface is friable, or the paint takes the dust with it.

3

Use the matching primer from the same family rather than a general purpose one.

4

Do not overcoat a silicate system with an acrylic paint later.

5

Allow the stated time between coats; the reaction is chemical, not just drying.

Common mistakes to avoid

  • Applying silicate paint over an existing plastic paint, which gives it nothing to bond to.
  • Skipping the consolidant on a chalky or friable surface.
  • Treating a breathable system as a waterproofing layer.
  • Painting in full sun, which flashes off the water before the reaction completes.

What you can expect

Authorisation

Supplied as an authorised Kerakoll distributor in the UAE

Coverage

Supplied from Dubai, Abu Dhabi and Sharjah, UAE wide delivery

Documentation

Technical data sheets hosted on every product page

Technical guidance

Product selection against substrate, exposure and site conditions

Quotations

BOQ based quotations with practical alternatives where an item is on order

Range

105 Kerakoll products across six product groups

Frequently Asked Questions

It reacts chemically with a mineral substrate rather than forming a film on top of it. The result is a finish that is part of the wall, stays vapour permeable and does not peel in the way a film can. It only works on mineral surfaces, so an existing plastic paint has to come off first.

Only if the old coating is mineral or has been removed. Over an acrylic or vinyl paint there is nothing for the silicate to bond with, and it will fail. Tell us what is on the wall now and we will advise whether preparation or a different system is needed.

Need a recommendation or a quotation for mineral finishes?

Send your project details on WhatsApp or by email and we will come back the same day.

Share these details for a quick response:

  • The substrate and what is currently on it
  • Whether the surface is sound or friable
  • Internal or external, and the area in square metres
  • Whether breathability is a specification requirement
  • City and the date you need it on site
Chat on WhatsApp