
Kerakoll Surface TreatmentNo. 01 / 6
Biocalce Rinzaffo Technical Data Sheet (TDS)
WTA-certified, breathable mortar based on NHL 3.5 natural hydraulic lime for rough coating of masonry
Biocalce Rinzaffo is a WTA certified breathable mortar based on NHL 3.5 natural hydraulic lime, used as the rough coat that goes on before a dehumidifying plaster. It is the key layer of the system.
- Rough coat on masonry before a dehumidifying plaster
- Key layer for highly breathable lime plaster systems
- Damp affected and salt affected masonry restoration
- Work specified to the WTA restoration standard
Build a list across products and send it once, or ask about Biocalce Rinzaffo on WhatsApp now.
- Consumption
- 1.5 kg/m² per mm
- Pack we stock
- 25 kg
About Biocalce Rinzaffo
Thrown on to leave a coarse open surface, it gives the plaster above something to grip and it regulates how moisture and salts move out of the wall. Natural hydraulic lime is chosen over cement here for a reason: lime stays vapour permeable and relatively soft, so damp can evaporate through the build up, whereas a cement rich coat blocks that path and drives the salts sideways into the masonry instead. WTA certification is the German restoration standard for that behaviour. Supplied in 25 kg bags. On salt affected ground floor walls the rough coat is not optional.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Rinzaffo as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 5 to 15 mm.
As published in the data sheet
375kg
- 1.5 kg/m2 per mm
- 5 mm thick
- over 50 m2
Order 15 packs of 25 kg bag
Taken from the Biocalce Rinzaffo data sheet: Coverage: approx. 15 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet prints the rate per centimetre, 15 kg/m2 per cm, which is 1.5 kg/m2 per mm. Minimum thickness obtainable is about 5 mm and the sheet states no maximum, so the upper bound here is ours, not the sheet's.
Application
Where it is used.
- 01Rough coat on masonry before a dehumidifying plaster
- 02Key layer for highly breathable lime plaster systems
- 03Damp affected and salt affected masonry restoration
- 04Work specified to the WTA restoration standard
Specification
Technical data.
| Coverage | ≈ 15 kg/m² per cm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 4.8 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | WTA-certified, breathable mortar based on NHL 3.5 natural hydraulic lime for rough coating of masonry |
Typical values as Kerakoll prints them in the data sheet for Biocalce Rinzaffo. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 4.8 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Rinzaffo, a surface treatment manufactured by Kerakoll. WTA-certified, breathable mortar based on NHL 3.5 natural hydraulic lime for rough coating of masonry. Allow 1.5 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 4.8 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Rinzaffo |
|---|---|
| Manufacturer | Kerakoll |
| Type | Surface Treatment |
| Consumption | 1.5 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 4.8 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 15 kg/m² per cm of thickness
25 kg bags
You can download the official Biocalce Rinzaffo technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Silicato Consolidante
View TDS and specifications

Biocalce Silicato Fondo
View TDS and specifications

Biocalce Silicato Fondo Fino
View TDS and specifications

Biocalce Silicato Puro Pittura
View TDS and specifications

Geolite Microsilicato
EN 1504-2
View TDS and specifications
All Surface Treatments and FinishesEvery Kerakoll product and the distributor page
Biocalce Rinzaffo in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Rinzaffo you need, or describe the job and we will work it out with you.

