
Kerakoll Surface TreatmentNo. 03 / 6
Biocalce Silicato Fondo Technical Data Sheet (TDS)
Certified, eco-friendly natural intermediate filling coat based on pure stabilized potassium silicate
Biocalce Silicato Fondo is a natural intermediate filling coat based on pure stabilised potassium silicate, the layer between a prepared substrate and a silicate paint or render. Filling is the clue to what it is for.
- Intermediate filling coat under silicate paint
- Evening out porosity and minor texture before decoration
- Breathable mineral build ups on lime and silicate plasters
- Preparing repaired or patchy walls for a thin mineral finish
Build a list across products and send it once, or ask about Biocalce Silicato Fondo on WhatsApp now.
- Consumption
- 0.3 to 0.5 L/m² over 2 coats
- Pack we stock
- 14 l
About Biocalce Silicato Fondo
It has body, so it evens out the fine porosity and minor texture that would otherwise show through a thin mineral paint as patches of different sheen and absorbency. Silicate chemistry binds chemically to mineral substrates rather than forming a film over them, which keeps the wall vapour permeable and keeps the whole build up compatible. Consumption is stated as 0.5 kg per square metre. Supplied in 14 litre buckets with a six month shelf life, so order it with the paint rather than ahead of the programme. Apply to a sound, dust free surface.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Biocalce Silicato Fondo as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
15.0 to 25.0litres
- Per coat, diluted 10 to 15% with water: 0.15 to 0.25 litre/m2
- 2 coats
- over 50 m2
Order 2 packs of 14 litre bucket, also 4 litres
Taken from the Biocalce Silicato Fondo data sheet: Coverage: approx. 0.15 - 0.25 l/m2 for each coat. No site allowance is added unless you turn one on. The technical data table prints 0.15 to 0.25 l/m2 for each coat while the body text prints approx. 0.25 l/m2 per single coat. The wider table range is used here. A second coat is recommended.
Application
Where it is used.
- 01Intermediate filling coat under silicate paint
- 02Evening out porosity and minor texture before decoration
- 03Breathable mineral build ups on lime and silicate plasters
- 04Preparing repaired or patchy walls for a thin mineral finish
Specification
Technical data.
| Coverage | 0.15 to 0.25 litre/m2 for each coat |
|---|---|
| Pack size | 14 litre buckets |
| Mixing ratio | 15% |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | White liquid |
| Storage and shelf life | 6 months |
| Product type | Certified, eco-friendly natural intermediate filling coat based on pure stabilized potassium silicate |
Typical values as Kerakoll prints them in the data sheet for Biocalce Silicato Fondo. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
15%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Silicato Fondo, a surface treatment manufactured by Kerakoll. Certified, eco-friendly natural intermediate filling coat based on pure stabilized potassium silicate. Allow 0.3 to 0.5 L/m2 over 2 coats, as published by the manufacturer. Mix at 15%. Supplied in 14 litre buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Silicato Fondo |
|---|---|
| Manufacturer | Kerakoll |
| Type | Surface Treatment |
| Consumption | 0.3 to 0.5 L/m2 over 2 coats |
| Pack size | 14 litre buckets |
| Mixing ratio | 15% |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: 0.15 to 0.25 litre/m2 for each coat
14 litre buckets
You can download the official Biocalce Silicato Fondo technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Rinzaffo
View TDS and specifications

Biocalce Silicato Consolidante
View TDS and specifications

Biocalce Silicato Fondo Fino
View TDS and specifications

Biocalce Silicato Puro Pittura
View TDS and specifications

Geolite Microsilicato
EN 1504-2
View TDS and specifications
All Surface Treatments and FinishesEvery Kerakoll product and the distributor page
Biocalce Silicato Fondo in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Silicato Fondo you need, or describe the job and we will work it out with you.

