Biocalce Silicato Fondo Fino surface treatment pack
Kerakoll's own picture. The pack we stock: 14 l.

Kerakoll Surface TreatmentNo. 04 / 6

Biocalce Silicato Fondo Fino Technical Data Sheet (TDS)

Certified, eco-friendly, natural uniforming intermediate coat based on pure stabilized potassium silicate

Where the surface is already close to flat, Biocalce Silicato Fondo Fino is the lighter option: a natural uniforming intermediate coat based on pure stabilised potassium silicate. Uniforming rather than filling is the difference from the heavier grade.

  • Uniforming coat under natural silicate paint
  • Evening out absorbency on walls that are already flat
  • Breathable mineral decoration over lime plasters
  • Interior and exterior mineral build ups
Data sheet0.5 MB

Build a list across products and send it once, or ask about Biocalce Silicato Fondo Fino on WhatsApp now.

Consumption
0.2 to 0.4 L/m² over 2 coats
Pack we stock
14 l

About Biocalce Silicato Fondo Fino

It evens out absorbency and colour so the silicate paint over it dries to one consistent appearance, without adding the body that a textured or repaired wall would need. Choosing between the two comes down to how much the substrate still has to be corrected. Like the rest of the silicate range it bonds chemically into the mineral substrate and leaves the wall vapour permeable, which is what keeps it compatible with old lime work. Supplied in 14 litre buckets with a six month shelf life. The substrate must be dry and sound.

Documentation

Related documentation

  • Technical data sheet

    0.5 MB · PDF

    Biocalce Silicato Fondo Fino as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats

The sheet calls for 1 to 2.

As published in the data sheet

10.0 to 20.0litres

  • Per single coat: 0.1 to 0.2 litre/m2
  • 2 coats
  • over 50 m2

Order 1 to 2 packs of 14 litre bucket, also 4 litres

Send this quantity for a quote

Taken from the Biocalce Silicato Fondo Fino data sheet: Coverage: approx. 0.1 - 0.2 l/m2 per single coat. No site allowance is added unless you turn one on. The sheet says a second coat is recommended once full coverage has been checked.

Application

Where it is used.

  1. 01Uniforming coat under natural silicate paint
  2. 02Evening out absorbency on walls that are already flat
  3. 03Breathable mineral decoration over lime plasters
  4. 04Interior and exterior mineral build ups

Specification

Technical data.

Biocalce Silicato Fondo Fino technical specifications from the manufacturer TDS
Coverage≈ 0.1 - 0.2 l/m² per single coat
Pack size14 litre buckets
Mixing ratio15%
Application temperature+8 deg C to +30 deg C
ConsistencyWhite liquid
Storage and shelf life6 months
Product typeCertified, eco-friendly, natural uniforming intermediate coat based on pure stabilized potassium silicate

Typical values as Kerakoll prints them in the data sheet for Biocalce Silicato Fondo Fino. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

14 litre buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

15%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Storage

6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Biocalce Silicato Fondo Fino, a surface treatment manufactured by Kerakoll. Certified, eco-friendly, natural uniforming intermediate coat based on pure stabilized potassium silicate. Allow 0.2 to 0.4 L/m2 over 2 coats, as published by the manufacturer. Mix at 15%. Supplied in 14 litre buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Biocalce Silicato Fondo Fino
ProductBiocalce Silicato Fondo Fino
ManufacturerKerakoll
TypeSurface Treatment
Consumption0.2 to 0.4 L/m2 over 2 coats
Pack size14 litre buckets
Mixing ratio15%
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 0.1 - 0.2 l/m² per single coat

14 litre buckets

You can download the official Biocalce Silicato Fondo Fino technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Biocalce Silicato Fondo Fino in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Silicato Fondo Fino you need, or describe the job and we will work it out with you.

Chat on WhatsApp