
Kerakoll Surface TreatmentNo. 02 / 6
Biocalce Silicato Consolidante Technical Data Sheet (TDS)
Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free
A consolidant rather than a coating, Biocalce Silicato Consolidante is a natural, breathable, stabilising cortical consolidant based on pure stabilised potassium silicate, and it is solvent free. Cortical means it works within the outer skin of the substrate.
- Consolidating weak and chalking mineral surfaces
- Stabilising old lime plasters before decoration
- Preparing masonry for a breathable silicate build up
- Solvent free consolidation in occupied interiors
Build a list across products and send it once, or ask about Biocalce Silicato Consolidante on WhatsApp now.
- Consumption
- 0.4 L/m² over 2 coats
- Pack we stock
- 10 l
- Colour
- neutral liquid
About Biocalce Silicato Consolidante
The silicate penetrates the surface and reacts with the mineral it finds there, binding loose material back into a sound layer instead of gluing it down under a film. That matters because a weak chalking mineral surface takes any paint off with it when the paint eventually pulls away. Treated first, the surface holds. It stays breathable, which is why it suits old lime plasters and masonry rather than being limited to modern render. Supplied in 10 litre cans with a six month shelf life. Test an area first, since some substrates darken.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Biocalce Silicato Consolidante as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 3.
As published in the data sheet
20.0litres
- Per single coat, undiluted: 0.2 litre/m2
- 2 coats
- over 50 m2
Order 2 packs of 10 litre can, also 5 litres
Taken from the Biocalce Silicato Consolidante data sheet: Coverage Biocalce Silicato Consolidante: approx. 0.2 l/m2 per single coat. No site allowance is added unless you turn one on. Consolidation is applied in one or more coats, with a second coat after 12 hours. Dilution up to 50% by volume is allowed and the printed rate is for the undiluted product.
Application
Where it is used.
- 01Consolidating weak and chalking mineral surfaces
- 02Stabilising old lime plasters before decoration
- 03Preparing masonry for a breathable silicate build up
- 04Solvent free consolidation in occupied interiors
Specification
Technical data.
| Coverage | Biocalce Silicato Consolidante: ≈ 0.2 l/m² per single coat. ** Tests carried out according to CSTB method, bacterial and fungal cont |
|---|---|
| Pack size | 10 litre cans |
| Colours | neutral liquid |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | neutral liquid |
| Storage and shelf life | 6 months |
| Product type | Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free |
Typical values as Kerakoll prints them in the data sheet for Biocalce Silicato Consolidante. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 litre cans. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Silicato Consolidante, a surface treatment manufactured by Kerakoll. Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free. Allow 0.4 L/m2 over 2 coats, as published by the manufacturer. Supplied in 10 litre cans. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Silicato Consolidante |
|---|---|
| Manufacturer | Kerakoll |
| Type | Surface Treatment |
| Consumption | 0.4 L/m2 over 2 coats |
| Pack size | 10 litre cans |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Biocalce Silicato Consolidante: ≈ 0.2 l/m² per single coat. ** Tests carried out according to CSTB method, bacterial and fungal cont
10 litre cans
You can download the official Biocalce Silicato Consolidante technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Rinzaffo
View TDS and specifications

Biocalce Silicato Fondo
View TDS and specifications

Biocalce Silicato Fondo Fino
View TDS and specifications

Biocalce Silicato Puro Pittura
View TDS and specifications

Geolite Microsilicato
EN 1504-2
View TDS and specifications
All Surface Treatments and FinishesEvery Kerakoll product and the distributor page
Biocalce Silicato Consolidante in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Silicato Consolidante you need, or describe the job and we will work it out with you.

