
Kerakoll Surface TreatmentNo. 05 / 6
Biocalce Silicato Puro Pittura Technical Data Sheet (TDS)
Certified, eco-friendly, natural wall paint based on pure stabilized potassium silicate, with natural coloured earths and minerals
Biocalce Silicato Puro Pittura is a natural wall paint based on pure stabilised potassium silicate, coloured with natural earths and minerals. A silicate paint is not a film.
- Breathable wall paint over lime and silicate plasters
- Mineral decoration of restored masonry
- External elevations where colour fastness matters
- Interiors needing a natural solvent free finish
Build a list across products and send it once, or ask about Biocalce Silicato Puro Pittura on WhatsApp now.
- Consumption
- 0.15 to 0.25 L/m²
- Pack we stock
- 14 l
About Biocalce Silicato Puro Pittura
It reacts with the mineral surface beneath and becomes part of it, which is why it does not peel away in sheets the way an organic paint does once moisture gets behind it, and why the wall stays vapour permeable. Mineral pigments also hold their colour under strong sunlight better than many organic colourants, which is worth something on a UAE elevation. The condition is compatibility: silicate paint needs a mineral substrate, so it belongs over lime and silicate plasters, not over existing plastic paint. Supplied in 14 litre buckets with a six month shelf life. Use the matching silicate undercoat rather than a general primer.
Documentation
Related documentation
Technical data sheet
0.5 MB · PDF
Biocalce Silicato Puro Pittura as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
7.50 to 12.5litres
- Fine grain plaster finishing coat, two coats: 0.15 to 0.25 litre/m2
- over 50 m2
Order 1 pack of 14 litre bucket, also 4 litres
Taken from the Biocalce Silicato Puro Pittura data sheet: Coverage on finished substrate with fine-grain plaster: approx. 0.15 - 0.25 l/m2 for two coats. No site allowance is added unless you turn one on. The printed figure is the total for two coats, so it is not multiplied by a coat count. The sheet asks for a minimum of two coats, or more according to the level of coverage required, and the first coat is diluted with Biocalce Silicato Consolidante.
Application
Where it is used.
- 01Breathable wall paint over lime and silicate plasters
- 02Mineral decoration of restored masonry
- 03External elevations where colour fastness matters
- 04Interiors needing a natural solvent free finish
Specification
Technical data.
| Coverage | of Biocalce Silicato Puro Pittura (on fine-grain plaster finishing coat): ≈ 0.15 - 0.25 l/m2 for two coats of the product. ** Tests carried out according to CSTB method, bacterial an |
|---|---|
| Pack size | 14 litre buckets |
| Mixing ratio | 15% |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | white or coloured paste |
| Storage and shelf life | 6 months |
| Product type | Certified, eco-friendly, natural wall paint based on pure stabilized potassium silicate, with natural coloured earths and minerals |
Typical values as Kerakoll prints them in the data sheet for Biocalce Silicato Puro Pittura. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
15%. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Silicato Puro Pittura, a surface treatment manufactured by Kerakoll. Certified, eco-friendly, natural wall paint based on pure stabilized potassium silicate, with natural coloured earths and minerals. Allow 0.15 to 0.25 L/m2, as published by the manufacturer. Mix at 15%. Supplied in 14 litre buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Silicato Puro Pittura |
|---|---|
| Manufacturer | Kerakoll |
| Type | Surface Treatment |
| Consumption | 0.15 to 0.25 L/m2 |
| Pack size | 14 litre buckets |
| Mixing ratio | 15% |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: of Biocalce Silicato Puro Pittura (on fine-grain plaster finishing coat): ≈ 0.15 - 0.25 l/m2 for two coats of the product. ** Tests carried out according to CSTB method, bacterial an
14 litre buckets
You can download the official Biocalce Silicato Puro Pittura technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Rinzaffo
View TDS and specifications

Biocalce Silicato Consolidante
View TDS and specifications

Biocalce Silicato Fondo
View TDS and specifications

Biocalce Silicato Fondo Fino
View TDS and specifications

Geolite Microsilicato
EN 1504-2
View TDS and specifications
All Surface Treatments and FinishesEvery Kerakoll product and the distributor page
Biocalce Silicato Puro Pittura in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Silicato Puro Pittura you need, or describe the job and we will work it out with you.

