
Kerakoll Surface TreatmentNo. 06 / 6
Geolite Microsilicato Technical Data Sheet (TDS)
Mineral geo-paint for decorative protection of concrete
Geolite Microsilicato is a mineral geo-paint for the decorative protection of concrete, declared under EN 1504-2, the surface protection part of the standard. It does two things at once.
- Decorative protection of concrete structures
- Anti carbonation coating over completed concrete repairs
- Breathable protective finish on exposed concrete facades
- Surface protection specified to EN 1504-2
Build a list across products and send it once, or ask about Geolite Microsilicato on WhatsApp now.
- Class
- EN 1504-2
- Consumption
- 0.35 L/m²
- Pack we stock
- 14 l
- Colour
- in a criss-cross, irregular
About Geolite Microsilicato
It is breathable, so moisture inside the concrete can leave rather than build up behind a film, and it is anti carbonation, which slows the atmospheric carbon dioxide that lowers the alkalinity of the cover concrete and lets reinforcement begin to corrode. That is a protective function rather than a cosmetic one, and it is the reason a repaired structure is coated rather than left bare. The finish is a fine grain effect. On an exposed UAE structure, carbonation and chloride ingress work together, so apply the protective coat as soon as the repair mortar has cured.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Geolite Microsilicato as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
17.5litres
- Fine texture finished substrate, two coats: 0.35 litre/m2
- over 50 m2
Order 2 packs of 14 litre bucket, also 4 litres
Taken from the Geolite Microsilicato data sheet: Coverage on fine-texture finished substrate: approx. 0.35 l/m2 for two coats. No site allowance is added unless you turn one on. The printed figure is the total for two coats, so it is not multiplied by a coat count. The sheet says the product may be applied in more coats according to the level of coverage and colour effect required.
Application
Where it is used.
- 01Decorative protection of concrete structures
- 02Anti carbonation coating over completed concrete repairs
- 03Breathable protective finish on exposed concrete facades
- 04Surface protection specified to EN 1504-2
Specification
Technical data.
- EN 1504-2
| Classification | EN 1504-2 |
|---|---|
| Coverage | on fine-texture finished substrate ≈ 0.35 l/m² for two coats |
| Pack size | 14 litre |
| Colours | in a criss-cross, irregular |
| Application temperature | +5 deg C to +30 deg C |
| Consistency | white or coloured paste |
| Storage and shelf life | 12 months |
| Product type | Mineral geo-paint for decorative protection of concrete |
Typical values as Kerakoll prints them in the data sheet for Geolite Microsilicato. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
14 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Geolite Microsilicato, a surface treatment manufactured by Kerakoll, classified EN 1504-2. Mineral geo-paint for decorative protection of concrete. Allow 0.35 L/m2, as published by the manufacturer. Supplied in 14 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Geolite Microsilicato |
|---|---|
| Manufacturer | Kerakoll |
| Type | Surface Treatment |
| Classification | EN 1504-2 |
| Consumption | 0.35 L/m2 |
| Pack size | 14 litre |
| Unit of measurement | m2 |
Frequently Asked Questions
Geolite Microsilicato is classified EN 1504-2 according to the manufacturer's technical data sheet, as stated in the manufacturer's technical data sheet.
As per the TDS: on fine-texture finished substrate ≈ 0.35 l/m² for two coats
14 litre
You can download the official Geolite Microsilicato technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Rinzaffo
View TDS and specifications

Biocalce Silicato Consolidante
View TDS and specifications

Biocalce Silicato Fondo
View TDS and specifications

Biocalce Silicato Fondo Fino
View TDS and specifications

Biocalce Silicato Puro Pittura
View TDS and specifications
All Surface Treatments and FinishesEvery Kerakoll product and the distributor page
Geolite Microsilicato in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Geolite Microsilicato you need, or describe the job and we will work it out with you.

