
Kerakoll flooring systems, from the primer up
A floor covering is only as good as the layers under it. Kerakoll covers that build up: adhesion promoters and primers that control the suction of the slab, self levelling compounds that give a covering the flat plane it needs, and adhesives formulated for wood, vinyl, rubber and textile backings. The range is built around very low emission formulations, which matters in an occupied fit out where the building is handed over days after the floor goes down. Lapiz Blue supplies it from Dubai, Abu Dhabi and Sharjah. Tell us the covering, the substrate and the thickness you have to work in, and we will specify the layers rather than a single product.
Visit Kerakoll Official Website
The range. All 24.
Where it is used
Priming concrete and screed before a levelling compound
Levelling slabs before vinyl, wood or textile coverings
Bonding engineered and solid wood flooring
Bonding vinyl, LVT and rubber in commercial interiors
Occupied fit outs where emissions and odour matter
Floors over underfloor heating
How to choose
Start with the covering. Wood, vinyl and textile each need a different adhesive chemistry.
Prime first. Suction control is what stops a levelling compound drying out and dusting.
Match the self leveller to the thickness you actually have at the thinnest point.
Check the emission rating if the building will be occupied soon after handover.
For underfloor heating, confirm the adhesive is rated for the temperature cycling.
Let each layer reach the moisture level the sheet states before the next goes down.
Common mistakes to avoid
- Laying a levelling compound on an unprimed slab, which is the most common cause of failure.
- Using a wood adhesive under vinyl, or the reverse, because both were on the van.
- Fitting a covering before the substrate has reached its stated moisture content.
- Ignoring the emission rating in a building that is about to be occupied.
What you can expect
Authorisation
Supplied as an authorised Kerakoll distributor in the UAE
Coverage
Supplied from Dubai, Abu Dhabi and Sharjah, UAE wide delivery
Documentation
Technical data sheets hosted on every product page
Technical guidance
Product selection against substrate, exposure and site conditions
Quotations
BOQ based quotations with practical alternatives where an item is on order
Range
105 Kerakoll products across six product groups
Frequently Asked Questions
Almost always. A primer controls how fast the slab draws water out of the compound. Without it the compound dries before it has hydrated, leaving a weak dusty surface that takes the covering off with it later. The range includes adhesion promoters for difficult and non absorbent substrates as well as standard primers.
Wood moves with humidity, so the adhesive has to stay slightly elastic rather than set rigid. Kerakoll supplies adhesives formulated for wood specifically. Send the board type, the format and the substrate and we will confirm which grade, because solid and engineered boards behave differently.
It describes how much volatile organic compound the product releases as it cures. On a fit out that hands over quickly, or in a school or hospital, that decides whether the space can be occupied. Kerakoll build their range around very low emission formulations, and we can supply the certification with a submittal.
Need a recommendation or a quotation for flooring systems?
Send your project details on WhatsApp or by email and we will come back the same day.
Share these details for a quick response:
- The floor covering going down
- The substrate and its condition
- Build up thickness available at the thinnest point
- Area in square metres
- Whether the floor is heated
- City and the date you need it on site
All technical data sheets
- Active Prime FixTDS
- Active Prime GripTDS
- Aqua-Pur BasicTDS
- Aqua-Pur FlexTDS
- Aqua-Pur HPXTDS
- B3TDS
- GrinkolTDS
- Grintak MTDS
- KeracemTDS
- Keracem ProntoTDS
- Keracem ProntoplusTDS
- KeradurTDS
- Keragrip PulepTDS
- KerarepTDS
- L34 EvolutionTDS
- L34 FlexTDS
- L34 HybridTDS
- L34 PlusTDS
- Primer UniTDS
- PU 70TDS
- QuarzoTDS
- R3 PlusTDS
- Remover ProTDS
- TackTDS