L34 Flex flooring adhesive pack
Kerakoll's own picture. The pack we stock: 16 kg.

Kerakoll Flooring AdhesiveNo. 16 / 24

L34 Flex Technical Data Sheet (TDS)

Certified, eco-friendly, elastic, organic, mineral adhesive for the high-performance laying of hardwood floors

Supplied in a 290 ml cartridge rather than a bucket, L34 Flex is not a bedding adhesive for a whole floor but a certified, eco friendly elastic organic mineral adhesive for the high performance laying of hardwood, used where a gun is the right tool. Elastic is the characteristic that matters: the cured bond flexes, so it takes up movement between the boards and what they are fixed to instead of cracking along the joint.

  • Gun applied fixing of hardwood boards
  • Perimeter and detail work on timber floors
  • Localised repairs and replacement boards
  • Elastic bonds where movement has to be accommodated
  • Low emission timber flooring installations
Data sheet0.2 MB

Build a list across products and send it once, or ask about L34 Flex on WhatsApp now.

Consumption
0.6 to 1.2 kg/m²
Pack we stock
16 kg
Colour
paste colour oak/walnut

About L34 Flex

Use it for detail work, perimeters, repairs and fixings a trowelled bed cannot reach. The open time is 60 minutes and the shelf life is 12 months. Keep cartridges out of the sun on site, because a cartridge left on a hot slab in the Emirates will be stiff enough to be unusable by the time the fitter needs it.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    L34 Flex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

30.0 to 60.0kg

  • Continuous layer bonding, notched trowel no. 4: 0.6 to 1.2 kg/m2
  • over 50 m2

Order 2 to 4 packs of 16 kg bucket

Send this quantity for a quote

Taken from the L34 Flex data sheet: Technical Data, Coverage, continuous layer bonding: approx. 600 to 1200 g/m2, applied with a notched trowel no. 4. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Laid by seam bonding instead, the sheet quotes approx. 2 m from one 290 ml cartridge and approx. 4 m from one 600 ml blister, a length rate that this area figure does not cover. Also supplied in 6 kg buckets.

Application

Where it is used.

  1. 01Gun applied fixing of hardwood boards
  2. 02Perimeter and detail work on timber floors
  3. 03Localised repairs and replacement boards
  4. 04Elastic bonds where movement has to be accommodated
  5. 05Low emission timber flooring installations

Specification

Technical data.

L34 Flex technical specifications from the manufacturer TDS
Coverage- continuous layer bonding ≈ 600 - 1200 g/m² - laying by seam bonding ≈ 2 m with 1 290 ml cartridge - laying by seam bonding ≈ 4 m wit
Pack size16 kg
Open time12 h
Set to light foot traffic2 h
Colourspaste colour oak/walnut
Application temperature+10 deg C to +35 deg C
Consistencypaste colour oak/walnut
Storage and shelf life12 months
Product typeCertified, eco-friendly, elastic, organic, mineral adhesive for the high-performance laying of hardwood floors

Typical values as Kerakoll prints them in the data sheet for L34 Flex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

16 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply L34 Flex, a flooring adhesive manufactured by Kerakoll. Certified, eco-friendly, elastic, organic, mineral adhesive for the high-performance laying of hardwood floors. Allow 0.6 to 1.2 kg/m2, as published by the manufacturer. Supplied in 16 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for L34 Flex
ProductL34 Flex
ManufacturerKerakoll
TypeFlooring Adhesive
Consumption0.6 to 1.2 kg/m2
Pack size16 kg
Set time2 h
Open time12 h
Unit of measurementm2

Frequently Asked Questions

As per the TDS: - continuous layer bonding ≈ 600 - 1200 g/m² - laying by seam bonding ≈ 2 m with 1 290 ml cartridge - laying by seam bonding ≈ 4 m wit

16 kg

You can download the official L34 Flex technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

L34 Flex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of L34 Flex you need, or describe the job and we will work it out with you.

Chat on WhatsApp