Aqua-Pur Flex flooring adhesive pack
Kerakoll's own picture. The pack we stock: 2 l.

Kerakoll Flooring AdhesiveNo. 04 / 24

Aqua-Pur Flex Technical Data Sheet (TDS)

Water based gel for filling defects and deep cracks

Not every defect in a timber floor can be sanded away. Aqua-Pur Flex is a water based gel for filling defects and deep cracks, used after sanding and before the varnish goes on, so it belongs to the repair step of the finishing sequence rather than to the build up underneath.

  • Filling deep cracks in hardwood floors
  • Repairing surface defects after sanding
  • Preparation ahead of a water based varnish
  • Narrow openings a paste filler cannot reach
  • Refurbishment of existing timber floors
Data sheet0.2 MB

Build a list across products and send it once, or ask about Aqua-Pur Flex on WhatsApp now.

Consumption
60 to 80 ml/m² over 2 coats
Pack we stock
2 l
Colour
, the content of resins,

About Aqua-Pur Flex

A gel suits the job better than a paste where the fault is deep or narrow, because it can be worked into the opening and will stay in it. The test is simple: shallow marks disappear under sanding, while anything that would still show through a varnish coat has to be filled first. Supplied in 2 litre cans with a 12 month shelf life. Let the boards acclimatise in the conditioned building before filling, or the gaps filled today will not be the gaps there next month.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    Aqua-Pur Flex as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

Coats, the sheet applies two or three

The sheet calls for 2 to 3.

As published in the data sheet

3,000 to 4,000ml

  • Spreader: 30 to 40 ml/m2
  • 2 coats
  • over 50 m2

Order 2 packs of 2000 ml can

Send this quantity for a quote

Taken from the Aqua-Pur Flex data sheet: Technical Data, Coverage: approx. 30 to 40 ml/m2 per coat, applied using a spreader in two or three coats. No site allowance is added unless you turn one on. A wood floor grouting gel, mixed with suitable wood powder on site, so the volume laid is greater than the volume of product. For bigger defects or deeper cracks the sheet allows a further application once the first has hardened.

Application

Where it is used.

  1. 01Filling deep cracks in hardwood floors
  2. 02Repairing surface defects after sanding
  3. 03Preparation ahead of a water based varnish
  4. 04Narrow openings a paste filler cannot reach
  5. 05Refurbishment of existing timber floors

Specification

Technical data.

Aqua-Pur Flex technical specifications from the manufacturer TDS
Coverage≈ 30 - 40 ml/m² per coats
Pack size2 litre cans
Colours, the content of resins,
Application temperature+5 deg C to +30 deg C
Consistencytranslucent white liquid
Storage and shelf life12 months
Product typeWater based gel for filling defects and deep cracks

Typical values as Kerakoll prints them in the data sheet for Aqua-Pur Flex. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

2 litre cans. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Aqua-Pur Flex, a flooring adhesive manufactured by Kerakoll. Water based gel for filling defects and deep cracks. Allow 60 to 80 ml/m2 over 2 coats, as published by the manufacturer. Supplied in 2 litre cans. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Aqua-Pur Flex
ProductAqua-Pur Flex
ManufacturerKerakoll
TypeFlooring Adhesive
Consumption60 to 80 ml/m2 over 2 coats
Pack size2 litre cans
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 30 - 40 ml/m² per coats

2 litre cans

You can download the official Aqua-Pur Flex technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Aqua-Pur Flex in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aqua-Pur Flex you need, or describe the job and we will work it out with you.

Chat on WhatsApp