
Kerakoll Self LevellingNo. 02 / 24
Active Prime Grip Technical Data Sheet (TDS)
Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders
Active Prime Grip is the quartz finished version of Kerakoll’s rapid universal adhesion promoter, used under self levelling products, cement based adhesives, finishing products and plasters or renders. The quartz finish is the whole reason to choose it over the unfilled grade: on a dense or smooth surface, where there is little suction for a primer to work with, the texture gives the layer above a mechanical key instead of asking adhesion to do everything.
- Priming smooth or dense substrates before self levelling products
- Keying non porous surfaces under cement based adhesives
- Preparation before finishing products
- Preparation before plasters and renders
- Overlay work where a mechanical key is needed
Build a list across products and send it once, or ask about Active Prime Grip on WhatsApp now.
- Consumption
- 0.2 to 0.3 kg/m²
- Pack we stock
- 10 kg
- Colour
- creamy white-coloured liquid
About Active Prime Grip
So the substrate makes this decision, not the product going over it. It comes in 10 kg buckets and carries a 12 month shelf life. Store it inside rather than in a site container, because a summer in the Emirates will take months off the working life of any water based primer left to cook in the heat.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Active Prime Grip as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
10.0 to 15.0kg
- Roller coat on the prepared substrate: 0.2 to 0.3 kg/m2
- over 50 m2
Order 1 to 2 packs of 10 kg bucket
Taken from the Active Prime Grip data sheet: COVERAGE: approximately 0.2 to 0.3 kg/m2, applied with a medium bristle synthetic fibre roller. No site allowance is added unless you turn one on. A primer, so the rate is per square metre and does not depend on thickness. Also supplied in 5 kg buckets.
Application
Where it is used.
- 01Priming smooth or dense substrates before self levelling products
- 02Keying non porous surfaces under cement based adhesives
- 03Preparation before finishing products
- 04Preparation before plasters and renders
- 05Overlay work where a mechanical key is needed
Specification
Technical data.
- EN 13813
| Coverage | ≈ 0.2 - 0.3 kg/m² |
|---|---|
| Pack size | 10 kg buckets |
| Colours | creamy white-coloured liquid |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | creamy white-coloured liquid |
| Storage and shelf life | 12 months |
| Product type | Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders |
Typical values as Kerakoll prints them in the data sheet for Active Prime Grip. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
10 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Active Prime Grip, a self levelling manufactured by Kerakoll. Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders. Allow 0.2 to 0.3 kg/m2, as published by the manufacturer. Supplied in 10 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Active Prime Grip |
|---|---|
| Manufacturer | Kerakoll |
| Type | Self Levelling |
| Consumption | 0.2 to 0.3 kg/m2 |
| Pack size | 10 kg buckets |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 0.2 - 0.3 kg/m²
10 kg buckets
You can download the official Active Prime Grip technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications

Grinkol
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Active Prime Grip in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Active Prime Grip you need, or describe the job and we will work it out with you.