
Kerakoll Flooring AdhesiveNo. 05 / 24
Aqua-Pur HPX Technical Data Sheet (TDS)
Certified, water-based varnish to treat hardwood floors
Aqua-Pur HPX is the treatment coat of the Aqua-Pur system, a certified water based varnish for hardwood floors and the layer that actually takes the traffic. Everything below it, the screed, the adhesive and the boards, is protected by this film, so the specification question is how hard the floor will be used and how often it can be taken out of service to be recoated.
- Protective top coat on hardwood floors
- Finishing over an Aqua-Pur base coat
- Recoating existing timber floors
- Low odour finishing in occupied interiors
- Residential and commercial timber flooring
Build a list across products and send it once, or ask about Aqua-Pur HPX on WhatsApp now.
- Consumption
- 160 to 200 ml/m² over 2 coats
- Pack we stock
- 5 l
- Colour
- and grain
About Aqua-Pur HPX
Being water based it is low odour, which keeps a fit out workable where a solvent finish would mean closing off and venting the area. It has a 12 month shelf life. Apply it over an Aqua-Pur base coat and respect the recoat window on the data sheet. In air conditioned buildings in the Emirates the surface skins quickly, so keep a wet edge and work in manageable bays.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Aqua-Pur HPX as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats, two for the classic finish and three for the silk finish
The sheet calls for 2 to 3.
As published in the data sheet
8,000 to 10,000ml
- Roller Plus: 80 to 100 ml/m2
- 2 coats
- over 50 m2
Order 2 packs of 5500 ml kit, 5 litre part A plus 0.5 litre part B
Taken from the Aqua-Pur HPX data sheet: Technical Data, Coverage: approx. 80 to 100 ml/m2 per coat, applied in two or three coats using Roller Plus. No site allowance is added unless you turn one on. On particularly absorbent woods the sheet says three coats may be needed for an even finish whatever the texture wanted, so allow for three. Aqua-Pur Flex is always applied before Aqua-Pur HPX.
Application
Where it is used.
- 01Protective top coat on hardwood floors
- 02Finishing over an Aqua-Pur base coat
- 03Recoating existing timber floors
- 04Low odour finishing in occupied interiors
- 05Residential and commercial timber flooring
Specification
Technical data.
| Coverage | ≈ 80 - 100 ml/m² per coat |
|---|---|
| Pack size | 5 litre |
| Pot life | 30 min |
| Set to light foot traffic | 3 h |
| Colours | and grain |
| Mixing ratio | part A : part B = 10 : 1 |
| Application temperature | +5 deg C to +30 deg C |
| Consistency | Part A translucent whitish liquid |
| Storage and shelf life | 12 months |
| Product type | Certified, water-based varnish to treat hardwood floors |
Typical values as Kerakoll prints them in the data sheet for Aqua-Pur HPX. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
part A : part B = 10 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Aqua-Pur HPX, a flooring adhesive manufactured by Kerakoll. Certified, water-based varnish to treat hardwood floors. Allow 160 to 200 ml/m2 over 2 coats, as published by the manufacturer. Mix at part A : part B = 10 : 1. Supplied in 5 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aqua-Pur HPX |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 160 to 200 ml/m2 over 2 coats |
| Pack size | 5 litre |
| Mixing ratio | part A : part B = 10 : 1 |
| Set time | 3 h |
| Pot life | 30 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 80 - 100 ml/m² per coat
5 litre
You can download the official Aqua-Pur HPX technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

B3
View TDS and specifications

Grinkol
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
Aqua-Pur HPX in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aqua-Pur HPX you need, or describe the job and we will work it out with you.

