B3 flooring adhesive pack
Kerakoll's own picture. The pack we stock: 500 g.

Kerakoll Flooring AdhesiveNo. 06 / 24

B3 Technical Data Sheet (TDS)

Certified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors

B3 belongs to a floating floor rather than a bonded one. It is a certified, eco friendly organic adhesive used to secure the tongue and groove ends of floating hardwood and laminated floors, so it joins board to board instead of holding the floor down to the slab.

  • Bonding tongue and groove joints in floating hardwood floors
  • Securing laminated floor joints
  • Floating floor installations over an underlay
  • Reinforcing board ends in long runs
  • Low emission interior flooring work
Data sheet0.2 MB

Build a list across products and send it once, or ask about B3 on WhatsApp now.

Pack we stock
500 g

About B3

That is the distinction that decides whether it is the right product: a glued down floor needs an L34 adhesive, while a floating floor over an underlay needs its joints bonded and nothing more. The open time is 5 minutes, which sets the pace of the work, since the joint has to be closed and the squeeze out cleaned off before it starts to skin. It has a 12 month shelf life. Clean the surplus from the board face as you go, because cured adhesive on a prefinished board is a repair, not a wipe.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    B3 as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

As published in the data sheet

The sheet quotes coverage by length, not by area: approximately 30 g per metre of tongue and groove joint, from 500 g bottles. Measure the metres of joint to be bonded and read that figure; there is no square metre rate to multiply. At 30 g per metre one bottle runs to roughly 16 metres of joint.

There is no area calculator for B3 because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.

Application

Where it is used.

  1. 01Bonding tongue and groove joints in floating hardwood floors
  2. 02Securing laminated floor joints
  3. 03Floating floor installations over an underlay
  4. 04Reinforcing board ends in long runs
  5. 05Low emission interior flooring work

Specification

Technical data.

B3 technical specifications from the manufacturer TDS
Pack size500 g
Open time20 min
Set to light foot traffic24 h
Application temperature+10 deg C to +30 deg C
Consistencywhite, fluid paste
Storage and shelf life12 months
Product typeCertified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors

Typical values as Kerakoll prints them in the data sheet for B3. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

500 g. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply B3, a flooring adhesive manufactured by Kerakoll. Certified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors. Supplied in 500 g. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for B3
ProductB3
ManufacturerKerakoll
TypeFlooring Adhesive
Pack size500 g
Set time24 h
Open time20 min
Unit of measurementm2

Frequently Asked Questions

500 g

You can download the official B3 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

B3 in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of B3 you need, or describe the job and we will work it out with you.

Chat on WhatsApp