Active Prime Fix self levelling pack
Kerakoll's own picture. The pack we stock: 1 kg.

Kerakoll Self LevellingNo. 01 / 24

Active Prime Fix Technical Data Sheet (TDS)

Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders

Between a prepared slab and whatever is laid over it sits a primer, and Active Prime Fix is Kerakoll’s rapid universal adhesion promoter for that layer. It is intended under self levelling products, cement based adhesives, finishing products and plasters or renders, so one bucket handles most of the preparation on a fit out instead of three separate primers.

  • Priming absorbent substrates before self levelling compounds
  • Preparation under cement based tile adhesives
  • Priming before finishing products
  • Priming before plasters and renders
  • Fit out work needing one universal primer
  • Fast track preparation where the floor is covered sooner
Data sheet0.3 MB

Build a list across products and send it once, or ask about Active Prime Fix on WhatsApp now.

Consumption
0.1 to 0.2 kg/m²
Pack we stock
1 kg
Colour
light blue liquid

About Active Prime Fix

What decides whether it suits the job is the substrate: use it where the surface is absorbent and the coat above is cementitious, so suction is evened out and dust is bound in rather than left under the bond. Rapid is the operative word, because the floor can be worked on sooner. Supplied in 5 kg buckets with a 12 month shelf life. In UAE summer conditions a primer film dries quicker than the programme assumes, so confirm it is ready before pouring.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Active Prime Fix as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

5.00 to 10.0kg

  • Roller coat on the prepared substrate: 0.1 to 0.2 kg/m2
  • over 50 m2

Order 1 pack of 25 kg can

Send this quantity for a quote

Taken from the Active Prime Fix data sheet: COVERAGE: approximately 0.1 to 0.2 kg/m2, applied with a medium bristle synthetic fibre roller. No site allowance is added unless you turn one on. A primer, so the rate is per square metre and does not depend on thickness. Also supplied in 1 kg bottles and 5 kg buckets.

Application

Where it is used.

  1. 01Priming absorbent substrates before self levelling compounds
  2. 02Preparation under cement based tile adhesives
  3. 03Priming before finishing products
  4. 04Priming before plasters and renders
  5. 05Fit out work needing one universal primer
  6. 06Fast track preparation where the floor is covered sooner

Specification

Technical data.

  • EN 13813
Active Prime Fix technical specifications from the manufacturer TDS
Coverage≈ 0.1 - 0.2 kg/m²
Pack size1 kg
Colourslight blue liquid
Application temperature+5 deg C to +35 deg C
Consistencylight blue liquid
Storage and shelf life12 months
Product typeRapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders

Typical values as Kerakoll prints them in the data sheet for Active Prime Fix. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Active Prime Fix, a self levelling manufactured by Kerakoll. Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders. Allow 0.1 to 0.2 kg/m2, as published by the manufacturer. Supplied in 1 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Active Prime Fix
ProductActive Prime Fix
ManufacturerKerakoll
TypeSelf Levelling
Consumption0.1 to 0.2 kg/m2
Pack size1 kg
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 0.1 - 0.2 kg/m²

1 kg

You can download the official Active Prime Fix technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Active Prime Fix in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Active Prime Fix you need, or describe the job and we will work it out with you.

Chat on WhatsApp