
Kerakoll Flooring AdhesiveNo. 03 / 24
Aqua-Pur Basic Technical Data Sheet (TDS)
Certified, water-based base coat varnish to protect hardwood floors
Once a hardwood floor is laid and sanded it still has to be protected, and Aqua-Pur Basic is the base coat in that final layer. A base coat is not a thinner version of the finish: it seals the timber, controls how much of the top coat the grain drinks, and settles the colour the finished boards will read as.
- Base coat varnish on new hardwood floors
- Sealing sanded timber before a top coat
- Controlling top coat absorption into the grain
- Low odour finishing in occupied buildings
- Preparation under an Aqua-Pur top coat
Build a list across products and send it once, or ask about Aqua-Pur Basic on WhatsApp now.
- Consumption
- 80 to 100 ml/m²
- Pack we stock
- 5 l
- Colour
- , the content of resins,
About Aqua-Pur Basic
Kerakoll classes it as a certified, water based varnish, so it is low odour next to a solvent system, which matters when a floor is finished in an occupied apartment or a tower on shared air handling. It carries a 12 month shelf life. Use it beneath an Aqua-Pur top coat rather than alone, and follow the sanding and recoat sequence on the data sheet, because adhesion between coats fails far more often than adhesion to the wood.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Aqua-Pur Basic as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
4,000 to 5,000ml
- Roller Plus: 80 to 100 ml/m2
- over 50 m2
Order 1 pack of 5500 ml kit, 5 litre part A plus 0.5 litre part B
Taken from the Aqua-Pur Basic data sheet: Technical Data, Coverage: approx. 80 to 100 ml/m2 per coat, applied using Roller Plus. No site allowance is added unless you turn one on. A base coat varnish: both the two coat and the three coat cycle on the sheet use one coat of Aqua-Pur Basic, the later coats being the finishing products. Mixed part A to part B 10 to 1 and then diluted 5 to 10 percent with clean water, so the volume spread is larger than the kit volume.
Application
Where it is used.
- 01Base coat varnish on new hardwood floors
- 02Sealing sanded timber before a top coat
- 03Controlling top coat absorption into the grain
- 04Low odour finishing in occupied buildings
- 05Preparation under an Aqua-Pur top coat
Specification
Technical data.
| Coverage | ≈ 80 - 100 ml/m² per coat |
|---|---|
| Pack size | 5 litre |
| Pot life | 30 min |
| Colours | , the content of resins, |
| Mixing ratio | part A : part B = 10 : 1 |
| Application temperature | +5 deg C to +30 deg C |
| Consistency | Part A translucent white liquid |
| Storage and shelf life | 12 months |
| Product type | Certified, water-based base coat varnish to protect hardwood floors |
Typical values as Kerakoll prints them in the data sheet for Aqua-Pur Basic. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
part A : part B = 10 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Aqua-Pur Basic, a flooring adhesive manufactured by Kerakoll. Certified, water-based base coat varnish to protect hardwood floors. Allow 80 to 100 ml/m2, as published by the manufacturer. Mix at part A : part B = 10 : 1. Supplied in 5 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Aqua-Pur Basic |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 80 to 100 ml/m2 |
| Pack size | 5 litre |
| Mixing ratio | part A : part B = 10 : 1 |
| Pot life | 30 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 80 - 100 ml/m² per coat
5 litre
You can download the official Aqua-Pur Basic technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications

Grinkol
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
Aqua-Pur Basic in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Aqua-Pur Basic you need, or describe the job and we will work it out with you.

