Grinkol flooring adhesive pack
Kerakoll's own picture. The pack we stock: 18 kg.

Kerakoll Flooring AdhesiveNo. 07 / 24

Grinkol Technical Data Sheet (TDS)

Certified, organic mineral adhesive to lay vinyl floors and carpet on absorbent substrates

Grinkol sits in the adhesive layer directly beneath a resilient or textile covering. Kerakoll classes it as a certified organic mineral adhesive for laying vinyl floors and carpet on absorbent substrates, and that last phrase is the specification test: it needs a surface that can draw water out of the adhesive, such as a cementitious screed or a levelling compound, not a sealed or dense one.

  • Laying vinyl floor coverings on absorbent substrates
  • Bonding carpet over screeds and levelling compounds
  • Sheet goods laid in long runs needing a long open time
  • Interior flooring over cementitious substrates
  • Low emission adhesive specifications
Data sheet0.4 MB

Build a list across products and send it once, or ask about Grinkol on WhatsApp now.

Consumption
0.2 to 0.4 kg/m²
Pack we stock
18 kg
Colour
beige paste

About Grinkol

Over a non absorbent surface a different chemistry is required. The open time is 90 minutes, which is generous and suits sheet goods laid in long runs where a short window would force the work into small bays. It has a 12 month shelf life. On a UAE site that open time shortens in an unconditioned space, so run the air conditioning before laying and not after.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    Grinkol as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

15.0 to 20.0kg

  • Using a spreader: 0.3 to 0.4 kg/m2
  • over 50 m2

Order 1 to 2 packs of 18 kg bucket

Send this quantity for a quote

Taken from the Grinkol data sheet: Technical Data, Coverage: approx. 200 to 300 g/m2 using a roller, approx. 300 to 400 g/m2 using a spreader. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. For fixing self laying carpet tiles with an absorbent backing the sheet says to dilute Grinkol 5 to 10 percent with water, which spreads further than these figures for the same weight of adhesive. Also supplied in 5 kg buckets.

Application

Where it is used.

  1. 01Laying vinyl floor coverings on absorbent substrates
  2. 02Bonding carpet over screeds and levelling compounds
  3. 03Sheet goods laid in long runs needing a long open time
  4. 04Interior flooring over cementitious substrates
  5. 05Low emission adhesive specifications

Specification

Technical data.

Grinkol technical specifications from the manufacturer TDS
Coverage- using a roller ≈ 200 - 300 g/m² - using a spreader ≈ 300 - 400 g/m²
Pack size18 kg
Open time90 min
Set to light foot traffic48 h
Coloursbeige paste
Application temperature+10 deg C to +30 deg C
Consistencybeige paste
Storage and shelf life12 months
Product typeCertified, organic mineral adhesive to lay vinyl floors and carpet on absorbent substrates

Typical values as Kerakoll prints them in the data sheet for Grinkol. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

18 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Grinkol, a flooring adhesive manufactured by Kerakoll. Certified, organic mineral adhesive to lay vinyl floors and carpet on absorbent substrates. Allow 0.2 to 0.4 kg/m2, as published by the manufacturer. Supplied in 18 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Grinkol
ProductGrinkol
ManufacturerKerakoll
TypeFlooring Adhesive
Consumption0.2 to 0.4 kg/m2
Pack size18 kg
Set time48 h
Open time90 min
Unit of measurementm2

Frequently Asked Questions

As per the TDS: - using a roller ≈ 200 - 300 g/m² - using a spreader ≈ 300 - 400 g/m²

18 kg

You can download the official Grinkol technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Grinkol in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Grinkol you need, or describe the job and we will work it out with you.

Chat on WhatsApp