
Kerakoll Flooring AdhesiveNo. 17 / 24
L34 Hybrid Technical Data Sheet (TDS)
Single-component, organic, mineral adhesive for the high-performance laying of hardwood floors
Single component is the distinction that defines L34 Hybrid, an organic mineral adhesive for the high performance laying of hardwood floors. There is nothing to mix, so there is no ratio to get wrong and no mixed batch wasted if the day stops early, which is why a single component adhesive is often chosen for smaller areas and for work that proceeds in stages.
- Bonding hardwood floors without site mixing
- Smaller areas and phased flooring work
- High performance laying over prepared substrates
- Installations where mixed adhesive would be wasted
- Timber flooring in residential and commercial interiors
Build a list across products and send it once, or ask about L34 Hybrid on WhatsApp now.
- Consumption
- 0.7 to 1.3 kg/m²
- Pack we stock
- 16 kg
- Colour
- neutral colour/oak paste
About L34 Hybrid
It still occupies the same layer as the two component grades, bonding boards to the prepared substrate. The open time is 60 minutes, shorter than the mixed L34 adhesives, so spread the bed in sections the fitter can stay ahead of. Supplied in 16 kg buckets with a 12 month shelf life. Close the bucket between sessions, since a single component adhesive reacts with moisture in the air and coastal air in the UAE carries plenty of it.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
L34 Hybrid as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
35.0 to 65.0kg
- Spreader no. 4: 0.7 to 1.3 kg/m2
- over 50 m2
Order 3 to 5 packs of 16 kg bucket
Taken from the L34 Hybrid data sheet: Technical Data, Coverage: approx. 700 to 1300 g/m2, applied with a spreader no. 4. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on.
Application
Where it is used.
- 01Bonding hardwood floors without site mixing
- 02Smaller areas and phased flooring work
- 03High performance laying over prepared substrates
- 04Installations where mixed adhesive would be wasted
- 05Timber flooring in residential and commercial interiors
Specification
Technical data.
| Coverage | ≈ 700 - 1300 g/m² |
|---|---|
| Pack size | 16 kg bucket |
| Open time | 12 h |
| Set to light foot traffic | 2 h |
| Colours | neutral colour/oak paste |
| Application temperature | +10 deg C to +40 deg C |
| Consistency | neutral colour/oak paste |
| Storage and shelf life | 12 months |
| Product type | Single-component, organic, mineral adhesive for the high-performance laying of hardwood floors |
Typical values as Kerakoll prints them in the data sheet for L34 Hybrid. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
16 kg bucket. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply L34 Hybrid, a flooring adhesive manufactured by Kerakoll. Single-component, organic, mineral adhesive for the high-performance laying of hardwood floors. Allow 0.7 to 1.3 kg/m2, as published by the manufacturer. Supplied in 16 kg bucket. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | L34 Hybrid |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 0.7 to 1.3 kg/m2 |
| Pack size | 16 kg bucket |
| Set time | 2 h |
| Open time | 12 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 700 - 1300 g/m²
16 kg bucket
You can download the official L34 Hybrid technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
L34 Hybrid in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of L34 Hybrid you need, or describe the job and we will work it out with you.

