L34 Plus flooring adhesive pack
Kerakoll's own picture. The pack we stock: 1 kg.

Kerakoll Flooring AdhesiveNo. 18 / 24

L34 Plus Technical Data Sheet (TDS)

Certified, organic, mineral adhesive for the high-performance laying of hardwood floors

L34 Plus is a certified organic mineral adhesive for the high performance laying of hardwood floors, the layer that holds the boards to the prepared screed. Its pot life of 90 minutes shows the material is mixed before use, and that figure, matched by a 90 minute open time, sets the size of bay a fitter should work in: mix no more than can be spread and covered within it.

  • Bonding hardwood floors to screeds and levelled substrates
  • High performance laying of solid and engineered boards
  • Areas suited to a 90 minute open time
  • Timber flooring in residential and contract interiors
  • Work where a reactive adhesive is specified
Data sheet0.3 MB

Build a list across products and send it once, or ask about L34 Plus on WhatsApp now.

Consumption
0.8 to 1.5 kg/m²
Pack we stock
1 kg

About L34 Plus

Against the Evolution grade it is the straightforward choice where low odour is not the deciding factor on site. As with every bonded timber floor the substrate decides the outcome, so the screed has to be flat, sound and dry to the figure on the data sheet before any adhesive is spread. It has a 12 month shelf life. Store it off the floor and out of direct heat.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    L34 Plus as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

40.0 to 75.0kg

  • Notched trowel no. 4: 0.8 to 1.5 kg/m2
  • over 50 m2

Order 4 to 8 packs of 10 kg monopack, 9 kg part A plus 1 kg part B

Send this quantity for a quote

Taken from the L34 Plus data sheet: Technical Data, Coverage: approx. 800 to 1500 g/m2, applied with a notched trowel no. 4. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. One range for the whole trowel choice rather than a row per notch. Two component, mixed 9 to 1 as packed.

Application

Where it is used.

  1. 01Bonding hardwood floors to screeds and levelled substrates
  2. 02High performance laying of solid and engineered boards
  3. 03Areas suited to a 90 minute open time
  4. 04Timber flooring in residential and contract interiors
  5. 05Work where a reactive adhesive is specified

Specification

Technical data.

L34 Plus technical specifications from the manufacturer TDS
Coverage≈ 800 - 1500 g/m²
Pack size1 kg
Pot life90 min
Open time8 h
Set to light foot traffic8 h
Application temperature+10 deg C to +35 deg C
Consistencypaste colour oak
Storage and shelf life12 months
Product typeCertified, organic, mineral adhesive for the high-performance laying of hardwood floors

Typical values as Kerakoll prints them in the data sheet for L34 Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

90 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply L34 Plus, a flooring adhesive manufactured by Kerakoll. Certified, organic, mineral adhesive for the high-performance laying of hardwood floors. Allow 0.8 to 1.5 kg/m2, as published by the manufacturer. Supplied in 1 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for L34 Plus
ProductL34 Plus
ManufacturerKerakoll
TypeFlooring Adhesive
Consumption0.8 to 1.5 kg/m2
Pack size1 kg
Set time8 h
Pot life90 min
Open time8 h
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 800 - 1500 g/m²

1 kg

You can download the official L34 Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

L34 Plus in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of L34 Plus you need, or describe the job and we will work it out with you.

Chat on WhatsApp