
Kerakoll PrimerNo. 19 / 24
Primer Uni Technical Data Sheet (TDS)
Universal, consolidating adhesion promoter for mortars and plasters/renders
Primer Uni is a universal consolidating adhesion promoter for mortars and plasters or renders, which puts it at the interface between a prepared substrate and the cementitious layer going over it. Consolidating is the useful word: it binds the surface as well as promoting adhesion, so it suits a substrate that is sound but dusty, where a plain bonding primer would simply seal the dust in place.
- Priming substrates before mortars
- Preparation before plasters and renders
- Consolidating sound but dusty surfaces
- Improving adhesion of cementitious layers
- General preparation on repair and finishing work
Build a list across products and send it once, or ask about Primer Uni on WhatsApp now.
- Consumption
- 0.1 to 0.2 kg/m²
- Pack we stock
- 5 kg
- Colour
- green liquid
About Primer Uni
Choose it where the coat above is a mortar, a render or a plaster; where the next layer is a self levelling compound or a tile adhesive, the Active Prime products are the intended match. Supplied in 5 kg buckets with a 12 month shelf life. Dusty substrates are a constant on UAE sites, so vacuum rather than sweep before priming, or the primer does its work on the dust instead of the slab.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Primer Uni as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Coats
The sheet calls for 1 to 2.
As published in the data sheet
5.00 to 10.0kg
- As printed: 0.1 to 0.2 kg/m2
- 1 coat
- over 50 m2
Order 1 pack of 25 kg can
Taken from the Primer Uni data sheet: Coverage approx. 0.1 to 0.2 kg/m2. No site allowance is added unless you turn one on. Ready to use, and the sheet sets the dilution by substrate: as is on non absorbent substrates and as a surface insulator on compact gypsum or anhydrite, up to 1:2 with clean water on compact low absorption substrates, up to 1:3 on powdery gypsum or anhydrite followed by a second coat as is, and up to 1:4 where the job is to bind dust. Also available in 5 kg buckets. The sheet prints a single range of 0.1 to 0.2 and no substrate table, so the calculator offers the range rather than splitting it into rows the manufacturer never published.
Application
Where it is used.
- 01Priming substrates before mortars
- 02Preparation before plasters and renders
- 03Consolidating sound but dusty surfaces
- 04Improving adhesion of cementitious layers
- 05General preparation on repair and finishing work
Specification
Technical data.
| Coverage | ≈ 0.1 - 0.2 kg/m² |
|---|---|
| Pack size | 5 kg buckets |
| Colours | green liquid |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | green liquid |
| Storage and shelf life | 12 months |
| Product type | Universal, consolidating adhesion promoter for mortars and plasters/renders |
Typical values as Kerakoll prints them in the data sheet for Primer Uni. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
5 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Primer Uni, a primer manufactured by Kerakoll. Universal, consolidating adhesion promoter for mortars and plasters/renders. Allow 0.1 to 0.2 kg/m2, as published by the manufacturer. Supplied in 5 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Primer Uni |
|---|---|
| Manufacturer | Kerakoll |
| Type | Primer |
| Consumption | 0.1 to 0.2 kg/m2 |
| Pack size | 5 kg buckets |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 0.1 - 0.2 kg/m²
5 kg buckets
You can download the official Primer Uni technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
Primer Uni in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Primer Uni you need, or describe the job and we will work it out with you.

