
Kerakoll Flooring AdhesiveNo. 20 / 24
PU 70 Technical Data Sheet (TDS)
Organic mineral adhesive to lay rubber, PVC and carpet flooring and artificial turf on absorbent and non-absorbent substrates
Of the resilient adhesives in this range, PU 70 is the one that does not care whether the substrate absorbs. Kerakoll classes it as an organic mineral adhesive for laying rubber, PVC and carpet flooring and artificial turf on absorbent and non absorbent substrates, which is what makes it the answer over existing ceramic, resin or sealed surfaces where a water dispersion adhesive would never cure.
- Laying rubber floor coverings
- Bonding PVC flooring on sealed or dense substrates
- Carpet laying over non absorbent surfaces
- Fixing artificial turf
- Overlay work on existing ceramic and resin floors
Build a list across products and send it once, or ask about PU 70 on WhatsApp now.
- Consumption
- 0.5 to 1.5 kg/m²
- Pack we stock
- 9 kg
About PU 70
Artificial turf is the other clue to its use: it holds coverings in places a dispersion adhesive cannot be trusted. The pot life is 1 hour and the open time 30 minutes, both short, so the work has to be organised before mixing starts. It has a 12 month shelf life. In UAE heat those times are an outside limit rather than an expectation, so mix small and keep the covering to hand.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
PU 70 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
50.0 to 75.0kg
- Rough or uneven rear: 1 to 1.5 kg/m2
- over 50 m2
Order 5 to 8 packs of 10 kg monopack, 9 kg part A plus 1 kg part B
Taken from the PU 70 data sheet: Technical Data, Coverage: approx. 500 to 800 g/m2 for materials with a smooth rear, approx. 1000 to 1500 g/m2 for materials with a rough or uneven rear. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. The sheet names no preferred row: the tooth size is chosen by the rear of the covering, so pick the row that matches it. Two component, mixed 9 to 1 as packed.
Application
Where it is used.
- 01Laying rubber floor coverings
- 02Bonding PVC flooring on sealed or dense substrates
- 03Carpet laying over non absorbent surfaces
- 04Fixing artificial turf
- 05Overlay work on existing ceramic and resin floors
Specification
Technical data.
| Coverage | ≈ 500 - 800 g/m² for materials with a smooth rear ≈ 1000 - 1500 g/m² for materials with a rough or uneven |
|---|---|
| Pack size | 9 kg |
| Pot life | 30 min |
| Open time | 10 min |
| Mixing ratio | 9 : 1 |
| Application temperature | +10 deg C to +30 deg C |
| Consistency | beige, grey, black, red and green paste |
| Storage and shelf life | 12 months |
| Product type | Organic mineral adhesive to lay rubber, PVC and carpet flooring and artificial turf on absorbent and non-absorbent substrates |
Typical values as Kerakoll prints them in the data sheet for PU 70. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
9 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
9 : 1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
30 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply PU 70, a flooring adhesive manufactured by Kerakoll. Organic mineral adhesive to lay rubber, PVC and carpet flooring and artificial turf on absorbent and non-absorbent substrates. Allow 0.5 to 1.5 kg/m2, as published by the manufacturer. Mix at 9 : 1. Supplied in 9 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | PU 70 |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 0.5 to 1.5 kg/m2 |
| Pack size | 9 kg |
| Mixing ratio | 9 : 1 |
| Pot life | 30 min |
| Open time | 10 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 500 - 800 g/m² for materials with a smooth rear ≈ 1000 - 1500 g/m² for materials with a rough or uneven
9 kg
You can download the official PU 70 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
PU 70 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of PU 70 you need, or describe the job and we will work it out with you.

