
Kerakoll AccessoryNo. 21 / 24
Quarzo Technical Data Sheet (TDS)
Calibrated, controlled granulometry mineral quartz, washed, perfectly dry
Quarzo is not a layer by itself but the aggregate that makes other layers work: calibrated mineral quartz of controlled granulometry, washed and perfectly dry. Controlled grading and dryness are exactly what site sand does not offer, and both matter, because a filler of known particle size is what gives a primer or resin coat its texture, its build and its stability.
- Broadcasting into primers to key the next layer
- Graded filler for mortars and resin systems
- Building texture and slip resistance into coatings
- Preparation work needing a clean dry quartz
- Mixes where site sand is not acceptable
Build a list across products and send it once, or ask about Quarzo on WhatsApp now.
- Consumption
- 1.5 to 2 kg/m²
- Pack we stock
- 25 kg
- Colour
- dark grey
About Quarzo
It is broadcast into a primer to key the next layer, blended into mortars and resins where a filler is specified, and used wherever a clean dry quartz is called for in the build up. The decision is straightforward: where a data sheet specifies a graded quartz, local sand is not a substitute. Supplied in 25 kg bags. Keep bags sealed and off the ground on site, since damp quartz defeats the one property it was bought for.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Quarzo as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
75.0 to 100kg
- Broadcast for tacking, Quarzo 1.3 or Quarzo 5.12: 1.5 to 2 kg/m2
- over 50 m2
Order 3 to 4 packs of 25 kg bag
Taken from the Quarzo data sheet: Coverage: Quarzo 1.3 when used for tacking approx. 1.5 to 2 kg/m2; Quarzo 5.12 when used for tacking approx. 1.5 to 2 kg/m2. Pack: 25 kg bags. No site allowance is added unless you turn one on. This is the one accessory with a published rate per square metre, and it covers only the broadcast for tacking. Used as a filler the sheet gives ratios instead, which cannot be turned into a rate per square metre without knowing the resin: 1 part resin to 1 part Quarzo 1.3, 1 part adhesive to 5 to 7 parts Quarzo 1.7 depending on the consistency wanted, and as a structural filler in epoxy screeds EP21 at 0.2 kg/m2 per mm with Quarzo 5.12 at 1.6 kg/m2 per mm in a 1 to 8 mix or 2.0 kg/m2 per mm in a 1 to 10 mix. The figures are taken at 23 degrees C and 50 percent relative humidity.
Application
Where it is used.
- 01Broadcasting into primers to key the next layer
- 02Graded filler for mortars and resin systems
- 03Building texture and slip resistance into coatings
- 04Preparation work needing a clean dry quartz
- 05Mixes where site sand is not acceptable
Specification
Technical data.
| Coverage | Quarzo 1.3 when used for tacking ≈ 1.5 - 2 kg/m² when used as a filler 1 resin : 1 Quarzo 1.3 Quarzo 1.7 adhesive 1 : 5 - 7 Quarzo 1.7 dep |
|---|---|
| Pack size | 25 kg bags |
| Colours | dark grey |
| Product type | Calibrated, controlled granulometry mineral quartz, washed, perfectly dry |
Typical values as Kerakoll prints them in the data sheet for Quarzo. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
For quantity surveyors
BOQ clause.
Supply and apply Quarzo, a accessory manufactured by Kerakoll. Calibrated, controlled granulometry mineral quartz, washed, perfectly dry. Allow 1.5 to 2 kg/m2, as published by the manufacturer. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Quarzo |
|---|---|
| Manufacturer | Kerakoll |
| Type | Accessory |
| Consumption | 1.5 to 2 kg/m2 |
| Pack size | 25 kg bags |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: Quarzo 1.3 when used for tacking ≈ 1.5 - 2 kg/m² when used as a filler 1 resin : 1 Quarzo 1.3 Quarzo 1.7 adhesive 1 : 5 - 7 Quarzo 1.7 dep
25 kg bags
You can download the official Quarzo technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
Quarzo in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Quarzo you need, or describe the job and we will work it out with you.