
Kerakoll Flooring AdhesiveNo. 22 / 24
R3 Plus Technical Data Sheet (TDS)
Certified, organic mineral adhesive, to lay PVC, LVT and rubber coverings up to a thickness of 3 mm, linoleum and carpet on absorbent substrates
R3 Plus is the general purpose adhesive layer beneath thin resilient and textile coverings. Kerakoll specifies it as a certified organic mineral adhesive for laying PVC, LVT and rubber coverings up to a thickness of 3 mm, along with linoleum and carpet, on absorbent substrates.
- Laying LVT planks and tiles
- Bonding PVC and rubber coverings up to 3 mm thick
- Linoleum installations on absorbent substrates
- Carpet laying over screeds and levelling compounds
- Retail and residential resilient flooring
Build a list across products and send it once, or ask about R3 Plus on WhatsApp now.
- Consumption
- 0.25 to 0.35 kg/m²
- Pack we stock
- 18 kg
- Colour
- beige paste
About R3 Plus
Two limits in that sentence decide whether it fits: the 3 mm thickness, above which a heavier duty adhesive is needed, and the absorbent substrate, which rules it out over sealed or dense surfaces where PU 70 is the alternative. Thin coverings also demand a properly levelled base, because they reveal every imperfection in it. The open time is 60 minutes and the shelf life 12 months. LVT is laid in volume across UAE retail and residential work, so match the trowel notch to the plank and roll the floor as the data sheet asks.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
R3 Plus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
12.5 to 17.5kg
- Toothed spreader, size to suit the covering: 0.25 to 0.35 kg/m2
- over 50 m2
Order 1 pack of 18 kg bucket
Taken from the R3 Plus data sheet: Technical Data, Coverage: approx. 250 to 350 g/m2, applied with the recommended notched spreader. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. One range for the whole spreader choice rather than a row per notch. Also supplied in 5 kg buckets and 750 g tubs.
Application
Where it is used.
- 01Laying LVT planks and tiles
- 02Bonding PVC and rubber coverings up to 3 mm thick
- 03Linoleum installations on absorbent substrates
- 04Carpet laying over screeds and levelling compounds
- 05Retail and residential resilient flooring
Specification
Technical data.
| Coverage | ≈ 250 - 350 g/m² |
|---|---|
| Pack size | 18 kg |
| Open time | 60 min |
| Set to light foot traffic | 48 h |
| Colours | beige paste |
| Application temperature | +10 deg C to +30 deg C |
| Consistency | beige paste |
| Storage and shelf life | 12 months |
| Product type | Certified, organic mineral adhesive, to lay PVC, LVT and rubber coverings up to a thickness of 3 mm, linoleum and carpet on absorbent substrates |
Typical values as Kerakoll prints them in the data sheet for R3 Plus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
18 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply R3 Plus, a flooring adhesive manufactured by Kerakoll. Certified, organic mineral adhesive, to lay PVC, LVT and rubber coverings up to a thickness of 3 mm, linoleum and carpet on absorbent substrates. Allow 0.25 to 0.35 kg/m2, as published by the manufacturer. Supplied in 18 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | R3 Plus |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 0.25 to 0.35 kg/m2 |
| Pack size | 18 kg |
| Set time | 48 h |
| Open time | 60 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 250 - 350 g/m²
18 kg
You can download the official R3 Plus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
R3 Plus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of R3 Plus you need, or describe the job and we will work it out with you.

