
Kerakoll Flooring AdhesiveNo. 23 / 24
Remover Pro Technical Data Sheet (TDS)
Concentrated, wax-removing detergent for the removal of residual wax, oil and grease from resin, resilient materials, marble, ceramic floors
Before anything is laid or bonded, a floor has to be clean in a way sweeping does not achieve. Remover Pro is a concentrated wax removing detergent for taking residual wax, oil and grease off resin, resilient, marble and ceramic floors, so it belongs to the preparation step and also serves the maintenance of a finished floor.
- Removing residual wax from existing floors
- Degreasing resin and resilient surfaces
- Cleaning marble and ceramic before an overlay
- Preparation ahead of adhesives and coatings
- Deep cleaning as part of floor maintenance
Build a list across products and send it once, or ask about Remover Pro on WhatsApp now.
- Consumption
- 20 to 300 ml/m²
- Pack we stock
- 2.5 l
- Colour
- resistance before using it to
About Remover Pro
Contamination is the quiet cause of adhesive and coating failure: a surface can look sound and still carry a film nothing will bond through, and over an existing non absorbent floor that film is almost always there. Being concentrated it is diluted to suit the job, so follow the dilution on the data sheet rather than using it neat. It has a 12 month shelf life. Rinse thoroughly and let the floor dry, because detergent residue is just another contaminant.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Remover Pro as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
As published in the data sheet
10,000 to 15,000ml
- Diluted 1:1 with warm water: 200 to 300 ml/m2
- over 50 m2
Order 4 to 6 packs of 2500 ml can
Taken from the Remover Pro data sheet: Technical Data, Coverage: approx. 20 to 30 ml/m2 for product diluted 1:5 to 1:10, approx. 200 to 300 ml/m2 for product diluted 1:1. Dilution between 1:1 and 1:10 with pure water. No site allowance is added unless you turn one on. The figures are of the neat product, before dilution. Thick or very old layers need a greater concentration and a longer waiting time, and the sheet says not to use it undiluted on wooden floors or where new flooring is to be laid.
Application
Where it is used.
- 01Removing residual wax from existing floors
- 02Degreasing resin and resilient surfaces
- 03Cleaning marble and ceramic before an overlay
- 04Preparation ahead of adhesives and coatings
- 05Deep cleaning as part of floor maintenance
Specification
Technical data.
| Coverage | diluted product 1:5 - 1:10 ≈ 20 - 30 ml/m² |
|---|---|
| Pack size | 2.5 litre |
| Colours | resistance before using it to |
| Application temperature | from +10 °C |
| Consistency | Transparent liquid |
| Storage and shelf life | 12 months |
| Product type | Concentrated, wax-removing detergent for the removal of residual wax, oil and grease from resin, resilient materials, marble, ceramic floors |
Typical values as Kerakoll prints them in the data sheet for Remover Pro. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
2.5 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Remover Pro, a flooring adhesive manufactured by Kerakoll. Concentrated, wax-removing detergent for the removal of residual wax, oil and grease from resin, resilient materials, marble, ceramic floors. Allow 20 to 300 ml/m2, as published by the manufacturer. Supplied in 2.5 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Remover Pro |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 20 to 300 ml/m2 |
| Pack size | 2.5 litre |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: diluted product 1:5 - 1:10 ≈ 20 - 30 ml/m²
2.5 litre
You can download the official Remover Pro technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
Remover Pro in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Remover Pro you need, or describe the job and we will work it out with you.

