Tack flooring adhesive pack
Kerakoll's own picture. The pack we stock: 10 kg.

Kerakoll Flooring AdhesiveNo. 24 / 24

Tack Technical Data Sheet (TDS)

Organic adhesive for the fixing of self-laying PVC and rubber floor coverings on compact absorbent and non-absorbent substrates

Tack is the adhesive for a covering that is not meant to be permanently bonded. It is an organic adhesive for fixing self laying PVC and rubber floor coverings on compact absorbent and non absorbent substrates, which means it holds the covering in place and resists movement while still allowing a tile or plank to be lifted and replaced.

  • Fixing self laying PVC tiles and planks
  • Holding self laying rubber coverings in place
  • Floors that have to stay liftable and replaceable
  • Compact absorbent and non absorbent substrates
  • Retail and office areas over underfloor services
Data sheet0.3 MB

Build a list across products and send it once, or ask about Tack on WhatsApp now.

Consumption
0.15 to 0.25 kg/m²
Pack we stock
10 kg
Colour
beige fluid paste

About Tack

That is the whole basis for choosing it: where a floor has to stay maintainable, in a retail unit or an office over underfloor services, a permanent bond is a liability rather than a benefit. The word compact matters too, since a loose or dusty surface has to be consolidated first. The open time is 60 minutes and the shelf life 12 months. Supplied in 10 kg buckets. Confirm the covering is made for self laying before using it.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Tack as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

How it is being applied

As published in the data sheet

7.50 to 12.5kg

  • With a toothed spreader: 0.15 to 0.25 kg/m2
  • over 50 m2

Order 1 to 2 packs of 10 kg bucket

Send this quantity for a quote

Taken from the Tack data sheet: Technical Data, Coverage: approx. 150 to 200 g/m2 using a roller, approx. 150 to 250 g/m2 with a toothed spreader. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on.

Application

Where it is used.

  1. 01Fixing self laying PVC tiles and planks
  2. 02Holding self laying rubber coverings in place
  3. 03Floors that have to stay liftable and replaceable
  4. 04Compact absorbent and non absorbent substrates
  5. 05Retail and office areas over underfloor services

Specification

Technical data.

Tack technical specifications from the manufacturer TDS
Coverage- using a roller ≈ 150 - 200 g/m² - with a toothed spreader ≈ 150 - 250 g/m²
Pack size10 kg buckets
Open time60 min
Coloursbeige fluid paste
Application temperature+10 deg C to +30 deg C
Consistencybeige fluid paste
Storage and shelf life12 months
Product typeOrganic adhesive for the fixing of self-laying PVC and rubber floor coverings on compact absorbent and non-absorbent substrates

Typical values as Kerakoll prints them in the data sheet for Tack. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

10 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Tack, a flooring adhesive manufactured by Kerakoll. Organic adhesive for the fixing of self-laying PVC and rubber floor coverings on compact absorbent and non-absorbent substrates. Allow 0.15 to 0.25 kg/m2, as published by the manufacturer. Supplied in 10 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Tack
ProductTack
ManufacturerKerakoll
TypeFlooring Adhesive
Consumption0.15 to 0.25 kg/m2
Pack size10 kg buckets
Open time60 min
Unit of measurementm2

Frequently Asked Questions

As per the TDS: - using a roller ≈ 150 - 200 g/m² - with a toothed spreader ≈ 150 - 250 g/m²

10 kg buckets

You can download the official Tack technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Tack in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Tack you need, or describe the job and we will work it out with you.

Chat on WhatsApp