
Kerakoll Flooring AdhesiveNo. 15 / 24
L34 Evolution Technical Data Sheet (TDS)
Odourless, two-component, organic, mineral adhesive for the high-performance laying of hardwood floors
L34 Evolution is the adhesive layer under a glued down hardwood floor, specified by Kerakoll as an odourless, two component organic mineral adhesive for high performance laying. Two components mean a reactive cure that does not depend on water leaving the adhesive, which is what lets hardwood be bonded over substrates and in board thicknesses where a water based adhesive would move the timber.
- Bonding hardwood floors to prepared substrates
- High performance laying of wide and thick boards
- Odour sensitive fit outs and occupied buildings
- Timber flooring where a water based adhesive is unsuitable
- Large areas needing a 90 minute working window
Build a list across products and send it once, or ask about L34 Evolution on WhatsApp now.
- Consumption
- 0.8 to 1.5 kg/m²
- Pack we stock
- 1 kg
About L34 Evolution
Odourless is the practical differentiator: a hardwood floor is often laid late in a fit out, in a building that is already partly occupied, and odour decides whether that is possible at all. The pot life and open time are both 90 minutes, so a mixed batch and a spread bed give the same working window. It has a 12 month shelf life. Acclimatise the boards in the conditioned space before laying, never in a hot store.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
L34 Evolution as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
40.0 to 75.0kg
- Notched trowel, size to suit the board: 0.8 to 1.5 kg/m2
- over 50 m2
Order 4 to 8 packs of 10 kg monopack, 9 kg part A plus 1 kg part B
Taken from the L34 Evolution data sheet: Technical Data, Coverage: approx. 800 to 1500 g/m2, applied with the recommended notched trowel. The sheet prints these rates in grammes per square metre; they are shown here in kilogrammes per square metre. No site allowance is added unless you turn one on. Kerakoll publishes one range for the whole trowel choice rather than a row per notch, so the span from 800 to 1500 g/m2 is the trowel decision. Two component, mixed 9 to 1 as packed.
Application
Where it is used.
- 01Bonding hardwood floors to prepared substrates
- 02High performance laying of wide and thick boards
- 03Odour sensitive fit outs and occupied buildings
- 04Timber flooring where a water based adhesive is unsuitable
- 05Large areas needing a 90 minute working window
Specification
Technical data.
| Coverage | ≈ 800 - 1500 g/m² |
|---|---|
| Pack size | 1 kg |
| Pot life | 90 min |
| Open time | 8 h |
| Set to light foot traffic | 8 h |
| Application temperature | +10 deg C to +35 deg C |
| Consistency | paste colour oak/walnut |
| Storage and shelf life | 12 months |
| Product type | Odourless, two-component, organic, mineral adhesive for the high-performance laying of hardwood floors |
Typical values as Kerakoll prints them in the data sheet for L34 Evolution. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
90 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply L34 Evolution, a flooring adhesive manufactured by Kerakoll. Odourless, two-component, organic, mineral adhesive for the high-performance laying of hardwood floors. Allow 0.8 to 1.5 kg/m2, as published by the manufacturer. Supplied in 1 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | L34 Evolution |
|---|---|
| Manufacturer | Kerakoll |
| Type | Flooring Adhesive |
| Consumption | 0.8 to 1.5 kg/m2 |
| Pack size | 1 kg |
| Set time | 8 h |
| Pot life | 90 min |
| Open time | 8 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 800 - 1500 g/m²
1 kg
You can download the official L34 Evolution technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
L34 Evolution in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of L34 Evolution you need, or describe the job and we will work it out with you.

