Kerarep primer pack
Kerakoll's own picture. The pack we stock: 1 kg.

Kerakoll PrimerNo. 14 / 24

Kerarep Technical Data Sheet (TDS)

Extra fast-acting, bonding agent for gaps and cracks

Kerarep is a repair product rather than a layer of its own: an extra fast acting bonding agent for gaps and cracks, used to stabilise a substrate before the floor goes over it. Cracks and open joints in a screed do not stay where they are once a covering is bonded across them, so they are either filled and bonded or they come back through the finish.

  • Bonding and filling cracks in screeds
  • Stabilising open joints before a covering is laid
  • Localised substrate repairs on refurbishment work
  • Fast turnaround repairs between preparation and laying
  • Remedial work once an old covering has been lifted
Data sheet0.2 MB

Build a list across products and send it once, or ask about Kerarep on WhatsApp now.

Consumption
1.7 kg per litre of void
Pack we stock
1 kg

About Kerarep

Extra fast acting is the point, because this work falls in the gap between preparation and laying, and a product that needs a day to cure stops the whole sequence. Reach for it on localised faults, since a generally weak screed needs a consolidant instead. The shelf life is 18 months, longer than most of this range, so it is practical to keep a container on the van for cracks nobody saw until the old covering came up.

Documentation

Related documentation

  • Technical data sheet

    0.2 MB · PDF

    Kerarep as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage

How much you need.

m
mm
mm

Cracks and holes are cut out to a square section before filling, so the width and the depth are the chase you prepare, not the crack you found.

As published in the data sheet

1.02kg

  • 3 by 20 mm chase over 10 m is 0.6 litres to fill
  • 1.7 kg per litre of void

Order 1 pack of 1.03 kg kit, 1 kg part A plus 0.03 kg part B plus 20 staples

Send this quantity for a quote

Taken from the Kerarep data sheet: Technical Data: Coverage approx. 1.7 kg per litre. Maximum permitted width 3 mm. Specific weight of the mixture 1.7 kg/dm3. Pack: Part A bucket 1 kg / Part B tube 0.03 kg / Part C 20 metal staples. No site allowance is added unless you turn one on. The 3 mm width is the sheet's own maximum permitted width, so it is the widest gap this product may be used in and not an average. The 20 mm depth is a bound we supply and the sheet does not print: it asks only that the casting compound penetrate at least two thirds of the thickness of the screed, so set the depth from the screed you are working on and from the cuts made across the crack every 15 to 30 cm.

Application

Where it is used.

  1. 01Bonding and filling cracks in screeds
  2. 02Stabilising open joints before a covering is laid
  3. 03Localised substrate repairs on refurbishment work
  4. 04Fast turnaround repairs between preparation and laying
  5. 05Remedial work once an old covering has been lifted

Specification

Technical data.

Kerarep technical specifications from the manufacturer TDS
Pack size1 kg
Pot life30 min
Open timetime ≈ 10 min.
Mixing ratioPart A : Part B = 1,000 : 30
Application temperature+5 deg C to +30 deg C
ConsistencyPart A grey liquid / Part B white liquid / Part C metal staples
Storage and shelf life18 months
Product typeExtra fast-acting, bonding agent for gaps and cracks

Typical values as Kerakoll prints them in the data sheet for Kerarep. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Part A : Part B = 1,000 : 30. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

30 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

18 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Kerarep, a primer manufactured by Kerakoll. Extra fast-acting, bonding agent for gaps and cracks. Allow 1.7 kg per litre of void, as published by the manufacturer. Mix at Part A : Part B = 1,000 : 30. Supplied in 1 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Kerarep
ProductKerarep
ManufacturerKerakoll
TypePrimer
Consumption1.7 kg per litre of void
Pack size1 kg
Mixing ratioPart A : Part B = 1,000 : 30
Pot life30 min
Open timetime ≈ 10 min.
Unit of measurementm2

Frequently Asked Questions

1 kg

You can download the official Kerarep technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Kerarep in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Kerarep you need, or describe the job and we will work it out with you.

Chat on WhatsApp