Keragrip Pulep primer pack
Kerakoll's own picture. The pack we stock: 1 l.

Kerakoll PrimerNo. 13 / 24

Keragrip Pulep Technical Data Sheet (TDS)

Organic preparation coat for treatment and cleaning of non‑absorbent substrates

Non absorbent substrates are the awkward case in flooring, and Keragrip Pulep is made for them: an organic preparation coat for the treatment and cleaning of surfaces that will not take water in. Existing ceramic, resin and other sealed floors give an adhesive nothing to key into, and they usually carry a film of polish, oil or release agent as well.

  • Preparing existing ceramic and resin floors
  • Treating non absorbent substrates before adhesives
  • Cleaning sealed surfaces ahead of an overlay
  • Tile over tile refurbishment work
  • Preparation under levelling compounds on dense substrates
Data sheet0.3 MB

Build a list across products and send it once, or ask about Keragrip Pulep on WhatsApp now.

Consumption
30 ml/m²
Pack we stock
1 l
Colour
transparent liquid

About Keragrip Pulep

This product treats and cleans that surface so the layer above can bond, which puts it at the preparation step, below any primer or adhesive. A water drop decides it: if the substrate absorbs, use a consolidant or a primer instead. Supplied in 10 litre drums with a 12 month shelf life. Overlaying rather than removing an existing tiled floor is common on UAE fit outs, and this is the step that makes the overlay dependable.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    Keragrip Pulep as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²

As published in the data sheet

1,500ml

  • Single coat with a cloth, as the sheet quotes it: 30 ml/m2
  • over 50 m2

Order 2 packs of 1000 ml 1 litre tin

Send this quantity for a quote

Taken from the Keragrip Pulep data sheet: Coverage approx. 30 ml/m2, applied with a cotton cloth on smooth, compact, non absorbent substrates. No site allowance is added unless you turn one on. Ready to use and applied in a single coat. For priming expansion and deformation joints the sheet gives a different basis, approx. 1 tin per 400 m of a 20 x 10 mm joint. Also available in 10 litre drums.

Application

Where it is used.

  1. 01Preparing existing ceramic and resin floors
  2. 02Treating non absorbent substrates before adhesives
  3. 03Cleaning sealed surfaces ahead of an overlay
  4. 04Tile over tile refurbishment work
  5. 05Preparation under levelling compounds on dense substrates

Specification

Technical data.

Keragrip Pulep technical specifications from the manufacturer TDS
Coverage≈ 30 ml/m²
Pack size1 litre
Colourstransparent liquid
Consistencytransparent liquid
Storage and shelf life12 months
Product typeOrganic preparation coat for treatment and cleaning of non‑absorbent substrates

Typical values as Kerakoll prints them in the data sheet for Keragrip Pulep. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

1 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keragrip Pulep, a primer manufactured by Kerakoll. Organic preparation coat for treatment and cleaning of non‑absorbent substrates. Allow 30 ml/m2, as published by the manufacturer. Supplied in 1 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keragrip Pulep
ProductKeragrip Pulep
ManufacturerKerakoll
TypePrimer
Consumption30 ml/m2
Pack size1 litre
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 30 ml/m²

1 litre

You can download the official Keragrip Pulep technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keragrip Pulep in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keragrip Pulep you need, or describe the job and we will work it out with you.

Chat on WhatsApp