
Kerakoll Self LevellingNo. 11 / 24
Keracem Prontoplus Technical Data Sheet (TDS)
Certified, ready-to-use, fibre-reinforced, normal-setting and rapid-drying mineral screed to be covered with adhesives
Keracem Prontoplus is the fibre reinforced member of the Keracem family, a certified ready to use, normal setting and rapid drying mineral screed to be covered with adhesives. It occupies the same layer as Keracem Pronto, between the structural slab and the floor covering, and the fibres are the reason to choose it: dispersed reinforcement controls the fine shrinkage cracking a screed is prone to across large bays and over services.
- Fibre reinforced screeds over structural slabs
- Large bays where shrinkage cracking is a risk
- Screeding over services and heated elements
- Rapid drying screeds beneath bonded coverings
- Ready to use screeding on fit out programmes
Build a list across products and send it once, or ask about Keracem Prontoplus on WhatsApp now.
- Consumption
- 1.6 to 1.8 kg/m² per mm
- Pack we stock
- 25 kg
About Keracem Prontoplus
If the screed will be thin, heated or broken up by a complicated floor plan, that matters. The pot life is 2 hours, an hour shorter than Pronto, so plan the pour in smaller sections. Supplied in 25 kg bags with a 12 month shelf life. Protect a fresh screed from direct sun and site draughts, which in the Emirates dry the surface long before the body has cured.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Keracem Prontoplus as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 20 to 80 mm.
As published in the data sheet
4,000 to 4,500kg
- 1.6 to 1.8 kg/m2 per mm
- 50 mm thick
- over 50 m2
Order 160 to 180 packs of 25 kg bag
Taken from the Keracem Prontoplus data sheet: COVERAGE: approximately 16 to 18 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Printed thicknesses are 20 to 80 mm for a bonded screed and 40 to 80 mm for a floating screed, with a maximum of 80 mm.
Application
Where it is used.
- 01Fibre reinforced screeds over structural slabs
- 02Large bays where shrinkage cracking is a risk
- 03Screeding over services and heated elements
- 04Rapid drying screeds beneath bonded coverings
- 05Ready to use screeding on fit out programmes
Specification
Technical data.
- EN 13813
| Coverage | ≈ 16 - 18 kg/m² per cm of thickness |
|---|---|
| Pack size | 25 kg bags |
| Pot life | 2 h |
| Set to light foot traffic | 8 h |
| Mixing ratio | ≈ 1.7 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | mixture of binders and aggregates |
| Storage and shelf life | 12 months |
| Product type | Certified, ready-to-use, fibre-reinforced, normal-setting and rapid-drying mineral screed to be covered with adhesives |
Typical values as Kerakoll prints them in the data sheet for Keracem Prontoplus. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 1.7 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
2 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Keracem Prontoplus, a self levelling manufactured by Kerakoll. Certified, ready-to-use, fibre-reinforced, normal-setting and rapid-drying mineral screed to be covered with adhesives. Allow 1.6 to 1.8 kg/m2 per mm, as published by the manufacturer. Mix at ≈ 1.7 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Keracem Prontoplus |
|---|---|
| Manufacturer | Kerakoll |
| Type | Self Levelling |
| Consumption | 1.6 to 1.8 kg/m2 per mm |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 1.7 l / 1 x 25 kg bag |
| Set time | 8 h |
| Pot life | 2 h |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: ≈ 16 - 18 kg/m² per cm of thickness
25 kg bags
You can download the official Keracem Prontoplus technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Active Prime Fix
View TDS and specifications

Active Prime Grip
View TDS and specifications

Aqua-Pur Basic
View TDS and specifications

Aqua-Pur Flex
View TDS and specifications

Aqua-Pur HPX
View TDS and specifications

B3
View TDS and specifications
All Flooring SystemsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Mixing Applications
Mix at the stated water. Too much and the screed segregates, too little and it will not flow out.
View the range
Keiser
Grinders and Polishing
Taking the laitance off and vacuuming the slab down before anything is poured on it.
View the range
Hilti
PR 30-HVS Rotating Laser
Sets and checks the finished floor datum the screed is poured to.
View the range
Keracem Prontoplus in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keracem Prontoplus you need, or describe the job and we will work it out with you.