Keracem self levelling pack
Kerakoll's own picture. The pack we stock: 25 kg.

Kerakoll Self LevellingNo. 09 / 24

Keracem Technical Data Sheet (TDS)

Certified, hydraulic, normal-setting, rapid-drying mineral binder for high-performance screeds and heat-radiant slabs

Keracem is a binder rather than a finished mortar, and that is the first thing to understand about it. Kerakoll describes it as a certified hydraulic, normal setting and rapid drying mineral binder for high performance screeds and heat radiant slabs, so it is batched with aggregate on site to form the screed layer between the structural slab and the floor covering.

  • Site batched high performance screeds
  • Heat radiant floor slabs
  • Large area screeding where bagged material is impractical
  • Rapid drying screeds ahead of floor coverings
  • Levelling structural slabs before a covering
Data sheet0.4 MB

Build a list across products and send it once, or ask about Keracem on WhatsApp now.

Consumption
0.2 to 0.25 kg/m² per mm
Pack we stock
25 kg
Colour
mixture of binders

About Keracem

The reason to choose a binder over a bagged screed is volume: across a large area, mixing with local sand is cheaper and easier to get to the pour than hundreds of bags. Rapid drying is the other reason, since a conventional screed holds moisture long enough to delay every trade behind it. Supplied in 25 kg bags with a pot life of 3 hours and a 12 month shelf life. Confirm the mix proportions before the first batch.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    Keracem as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 20 to 80 mm.

As published in the data sheet

500 to 625kg

  • 0.2 to 0.25 kg/m2 per mm
  • 50 mm thick
  • over 50 m2

Order 20 to 25 packs of 25 kg bag

Send this quantity for a quote

Taken from the Keracem data sheet: Coverage: approx. 2 to 2.5 kg/m2 per cm of thickness, which is 0.2 to 0.25 kg/m2 per mm. The sheet quotes per centimetre and the division is ours. No site allowance is added unless you turn one on. This is the binder only, not the finished screed. The figure holds at the sheet's own dosage of 200 kg of Keracem per cubic metre of sand for ceramic and stone, and at least 250 for hardwood; the sand is a separate order and is most of the material. The sheet says heavy or concentrated loads must be calculated case by case. The 20 to 80 mm bounds are the sheet's bonded screed range and the 50 mm default is the thickness its own waiting times are quoted at. Mapei Topcem, the equivalent in that range, is treated the same way on this site.

Application

Where it is used.

  1. 01Site batched high performance screeds
  2. 02Heat radiant floor slabs
  3. 03Large area screeding where bagged material is impractical
  4. 04Rapid drying screeds ahead of floor coverings
  5. 05Levelling structural slabs before a covering

Specification

Technical data.

  • EN 13813
Keracem technical specifications from the manufacturer TDS
Coverage≈ 2 - 2.5 kg/m² per cm of thickness
Pack size25 kg bags
Pot life3 h
Set to light foot traffic8 h
Coloursmixture of binders
Application temperature+5 deg C to +35 deg C
Consistencymixture of binders
Storage and shelf life12 months
Product typeCertified, hydraulic, normal-setting, rapid-drying mineral binder for high-performance screeds and heat-radiant slabs

Typical values as Kerakoll prints them in the data sheet for Keracem. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

3 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Keracem, a self levelling manufactured by Kerakoll. Certified, hydraulic, normal-setting, rapid-drying mineral binder for high-performance screeds and heat-radiant slabs. Allow 0.2 to 0.25 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Keracem
ProductKeracem
ManufacturerKerakoll
TypeSelf Levelling
Consumption0.2 to 0.25 kg/m2 per mm
Pack size25 kg bags
Set time8 h
Pot life3 h
Unit of measurementm2

Frequently Asked Questions

As per the TDS: ≈ 2 - 2.5 kg/m² per cm of thickness

25 kg bags

You can download the official Keracem technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Keracem in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Keracem you need, or describe the job and we will work it out with you.

Chat on WhatsApp