
Kerakoll PlasterNo. 13 / 23
Biocalce Silicato Puro Technical Data Sheet (TDS)
Certified, eco-friendly, natural fine render, based on pure stabilised potassium silicate, completely coloured with natural soils and minerals
Biocalce Silicato Puro is a certified natural fine render based on pure stabilised potassium silicate, coloured throughout with natural soils and minerals. It sits at the top of a mineral build up as both the finish texture and the colour.
- Fine mineral render coloured throughout
- Breathable finish over lime and silicate build ups
- External elevations needing a non peeling mineral surface
- Restoration work kept within one mineral family
Build a list across products and send it once, or ask about Biocalce Silicato Puro on WhatsApp now.
- Consumption
- 1.8 to 2.4 kg/m²
- Pack we stock
- 25 kg
About Biocalce Silicato Puro
Silicate binders work by reacting with the mineral substrate rather than drying as a film over it, which gives a bond that does not blister or peel and leaves the wall vapour permeable. The condition is that the substrate must be mineral, because over an existing organic paint there is nothing for the silicate to react with. Supplied in 25 kg buckets with a six month shelf life, shorter than the lime products, so plan deliveries around the programme. Use the matching silicate undercoat beneath it and approve the colour on a panel.
Documentation
Related documentation
Technical data sheet
0.6 MB · PDF
Biocalce Silicato Puro as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
Trowel or method
Coats
The sheet calls for 1 to 2.
As published in the data sheet
105kg
- Biocalce Silicato Puro 1.2: 2.1 kg/m2
- 1 coat
- over 50 m2
Order 5 packs of 25 kg bucket
Taken from the Biocalce Silicato Puro data sheet: Coverage on finished substrate with Biocalce Intonachino Fino: 1.0 approx. 1.8 kg/m2 per single coat, 1.2 approx. 2.1 kg/m2, 1.5 approx. 2.4 kg/m2. No site allowance is added unless you turn one on. The figures are per single coat and per grain size, quoted on a substrate already finished with Biocalce Intonachino Fino.
Application
Where it is used.
- 01Fine mineral render coloured throughout
- 02Breathable finish over lime and silicate build ups
- 03External elevations needing a non peeling mineral surface
- 04Restoration work kept within one mineral family
Specification
Technical data.
- EN 998-1
| Coverage | on finished substrate with Biocalce Intonachino Fino: - Biocalce Silicato Puro 1.0 ≈ 1.8 kg/m² per single coat - Biocalce Silicato Puro 1.2 ≈ 2.1 kg/m² per single coat - Biocalce Silic |
|---|---|
| Pack size | 25 kg buckets |
| Application temperature | +8 deg C to +30 deg C |
| Consistency | white or coloured paste |
| Storage and shelf life | 6 months |
| Product type | Certified, eco-friendly, natural fine render, based on pure stabilised potassium silicate, completely coloured with natural soils and minerals |
Typical values as Kerakoll prints them in the data sheet for Biocalce Silicato Puro. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg buckets. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
6 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Silicato Puro, a plaster manufactured by Kerakoll. Certified, eco-friendly, natural fine render, based on pure stabilised potassium silicate, completely coloured with natural soils and minerals. Allow 1.8 to 2.4 kg/m2, as published by the manufacturer. Supplied in 25 kg buckets. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Silicato Puro |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Consumption | 1.8 to 2.4 kg/m2 |
| Pack size | 25 kg buckets |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: on finished substrate with Biocalce Intonachino Fino: - Biocalce Silicato Puro 1.0 ≈ 1.8 kg/m² per single coat - Biocalce Silicato Puro 1.2 ≈ 2.1 kg/m² per single coat - Biocalce Silic
25 kg buckets
You can download the official Biocalce Silicato Puro technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Silicato Puro in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Silicato Puro you need, or describe the job and we will work it out with you.