
Kerakoll PlasterNo. 11 / 23
Biocalce Muratura Fino Technical Data Sheet (TDS)
Breathable mortar based on NHL 3.5 natural hydraulic lime for bedding, dubbing out and structural strengthening of masonry
Structural strengthening is what separates Biocalce Muratura Fino from the standard grade. It is a breathable NHL 3.5 natural hydraulic lime mortar for bedding and dubbing out masonry and also for strengthening it, the application where a lime mortar is used with reinforcement to improve how an existing wall carries load and resists movement.
- Structural strengthening of existing masonry
- Bedding and dubbing out in a lime build up
- Tight joints and small voids needing a finer mortar
- Restoration work that has to stay vapour permeable
Build a list across products and send it once, or ask about Biocalce Muratura Fino on WhatsApp now.
- Pack we stock
- 25 kg
About Biocalce Muratura Fino
Keeping that work in lime matters, because a strengthened wall still has to breathe and a cement based intervention leaves the masonry stiffer in one area than another. The finer grade also works into tighter joints and smaller voids. Supplied in 25 kg bags with twelve months of shelf life. Strengthening is designed rather than specified off a data sheet, so take the detail from the engineer for the structure in question.
Documentation
Related documentation
Technical data sheet
0.3 MB · PDF
Biocalce Muratura Fino as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage
How much you need.
As published in the data sheet
The sheet quotes coverage as approx. 1.7 kg per cubic decimetre of mortar, which is a volume and not a rate per square metre. It prints no bed thickness, no perpend width and no block size, so every dimension a volume calculator would ask for would be ours rather than the sheet's. Take the mortar volume off the drawing from the block size and the bed and perpend you are building to, then multiply the litres by 1.7 kg. One 25 kg bag makes about 14.7 litres of mortar at that rate. The fine 0 to 1.5 mm grading is the only thing that separates it from Biocalce Muratura on quantity.
There is no area calculator for Biocalce Muratura Fino because the sheet does not publish a rate per square metre. Send us the job and we will work the quantity out with you.
Application
Where it is used.
- 01Structural strengthening of existing masonry
- 02Bedding and dubbing out in a lime build up
- 03Tight joints and small voids needing a finer mortar
- 04Restoration work that has to stay vapour permeable
Specification
Technical data.
- EN 998-1
| Pack size | 25 kg bags |
|---|---|
| Mixing ratio | ≈ 4.8 l / 1 x 25 kg bag |
| Application temperature | +5 deg C to +35 deg C |
| Storage and shelf life | 12 months |
| Product type | Breathable mortar based on NHL 3.5 natural hydraulic lime for bedding, dubbing out and structural strengthening of masonry |
Typical values as Kerakoll prints them in the data sheet for Biocalce Muratura Fino. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
≈ 4.8 l / 1 x 25 kg bag. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Biocalce Muratura Fino, a plaster manufactured by Kerakoll. Breathable mortar based on NHL 3.5 natural hydraulic lime for bedding, dubbing out and structural strengthening of masonry. Mix at ≈ 4.8 l / 1 x 25 kg bag. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Biocalce Muratura Fino |
|---|---|
| Manufacturer | Kerakoll |
| Type | Plaster |
| Pack size | 25 kg bags |
| Mixing ratio | ≈ 4.8 l / 1 x 25 kg bag |
| Unit of measurement | m2 |
Frequently Asked Questions
25 kg bags
You can download the official Biocalce Muratura Fino technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biocalce Fondo
View TDS and specifications

Biocalce Fondo Universale
View TDS and specifications

Biocalce Intonachino Colorato
View TDS and specifications

Biocalce Intonachino Fino
View TDS and specifications

Biocalce Intonachino Granello
View TDS and specifications

Biocalce Intonachino Tipo "00"
View TDS and specifications
All Plasters and MasonryEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Keiser
Plaster Tools
A rendering machine mixes and sprays the coat onto the wall, which is how a facade gets covered without a gang of hands.
View the range
Peygran
Cement Tools
Finishing floats to rule the coat off and close the surface once it has taken up.
View the range
Keiser
Mixing Applications
A forced mix at the stated water gives the board life the sheet quotes.
View the range
Biocalce Muratura Fino in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Biocalce Muratura Fino you need, or describe the job and we will work it out with you.