
Kerakoll GroutNo. 08 / 30
Fuga-Wash Technical Data Sheet (TDS)
Detergent to be used as an additive in water used to clean Fugalite
Fuga-Wash is an additive rather than a cleaner in its own right. It goes into the water used to clean Fugalite grout during application, so the wash itself carries something that holds resin residue in suspension instead of smearing it back across the tile.
- Additive for Fugalite cleaning water
- Washing down during resin grouting
- Reducing resin film on tile faces
- Grouting glass mosaic and porcelain
Build a list across products and send it once, or ask about Fuga-Wash on WhatsApp now.
- Consumption
- 0.021 to 0.043 L/m²
- Pack we stock
- 1.5 l
- Colour
- transparent liquid
About Fuga-Wash
That makes it a product for the grouting operation, not the clean down afterwards: the aim is to avoid leaving a film at all rather than to remove one later. Shelf life is stated as 24 months. Judge the need by the tile face. A textured or lightly polished porcelain holds resin residue in a way a glazed ceramic does not, and that is where washing water with this additive earns its place. Keep the matched detergents on site for anything the wash leaves behind.
Documentation
Related documentation
Technical data sheet
0.2 MB · PDF
Fuga-Wash as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
As published in the data sheet
1.05 to 2.15litres
- As an additive in the cleaning water: 0.021 to 0.043 litre/m2
- over 50 m2
Order 1 to 2 packs of 1.5 litre bottle
Taken from the Fuga-Wash data sheet: Coverage: approx 35 to 70 m2 per 1.5 litre, which is 0.021 to 0.043 litre per m2. No site allowance is added unless you turn one on. An additive for the water used to clean Fugalite, not a grout, so it is priced per square metre of surface cleaned. The sheet prints the figure as square metres per 1.5 litre bottle and the rate here is that figure inverted.
Application
Where it is used.
- 01Additive for Fugalite cleaning water
- 02Washing down during resin grouting
- 03Reducing resin film on tile faces
- 04Grouting glass mosaic and porcelain
Where it is not the right product
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 13888 and ISO 13007
| Pack size | 1.5 litre |
|---|---|
| Colours | transparent liquid |
| Application temperature | +5 deg C to +35 deg C |
| Consistency | transparent liquid |
| Storage and shelf life | 24 months |
| Product type | Detergent to be used as an additive in water used to clean Fugalite |
Typical values as Kerakoll prints them in the data sheet for Fuga-Wash. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
1.5 litre. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Fuga-Wash, a grout manufactured by Kerakoll. Detergent to be used as an additive in water used to clean Fugalite. Allow 0.021 to 0.043 L/m2, as published by the manufacturer. Supplied in 1.5 litre. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Fuga-Wash |
|---|---|
| Manufacturer | Kerakoll |
| Type | Grout |
| Consumption | 0.021 to 0.043 L/m2 |
| Pack size | 1.5 litre |
| Unit of measurement | m2 |
Frequently Asked Questions
1.5 litre
You can download the official Fuga-Wash technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Fuga-Wash in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Fuga-Wash you need, or describe the job and we will work it out with you.