
Kerakoll Tile AdhesiveNo. 16 / 30
H40 Gel Technical Data Sheet (TDS)
Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid
H40 Gel is the general purpose adhesive in the H40 range, classified C2 TE S1. Every letter earns its place.
- Laying porcelain of all sizes
- Laying ceramic tiles
- Laying natural stone
- Wall tiling with no vertical slip
- Substrates with slight movement
Build a list across products and send it once, or ask about H40 Gel on WhatsApp now.
- Class
- C2 TE S1
- Consumption
- 1 to 1.2 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- White or grey pre-mixed powder
About H40 Gel
C2 is improved adhesion, which porcelain needs because it absorbs almost nothing, T is no vertical slip so wall tiles hold position, E is extended open time, and S1 is deformability, meaning the bed absorbs the movement a large tile transmits instead of passing it into the joint. Kerakoll describes it as structural, highly flexible and both thixotropic and fluid, for all types and sizes of porcelain, ceramic and natural stone, and it replaces Biogel No Limits. Supplied in 25 kg bags with a pot life of 6 hours, an open time of 60 minutes and a 12 month shelf life. Pot life is the bucket. Open time is the shorter and more critical figure.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
H40 Gel as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 2 to 20 mm.
As published in the data sheet
150 to 180kg
- 1 to 1.2 kg/m2 per mm
- 3 mm thick
- over 50 m2
Order 6 to 8 packs of 25 kg bag
Taken from the H40 Gel data sheet: Coverage: approx. 1 - 1.2 kg/m2 per mm of thickness. Thickness from 2 to 20 mm. No site allowance is added unless you turn one on. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.
Application
Where it is used.
- 01Laying porcelain of all sizes
- 02Laying ceramic tiles
- 03Laying natural stone
- 04Wall tiling with no vertical slip
- 05Substrates with slight movement
Specification
Technical data.
- C2 TE S1
- EN 12004 and ISO 13007
| Classification | C2 TE S1 |
|---|---|
| Coverage | ≈ 1 - 1.2 kg/m² per mm of thickness |
| Pack size | 25 kg bags |
| Pot life | 60 min |
| Open time | 20 min |
| Set to light foot traffic | 50 h |
| Colours | White or grey pre-mixed powder |
| Application temperature | +5 deg C to +40 deg C |
| Consistency | White or grey pre-mixed powder |
| Storage and shelf life | 12 months |
| Product type | Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid |
| Thickness | 2 to 20 mm |
Typical values as Kerakoll prints them in the data sheet for H40 Gel. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Working time
60 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply H40 Gel, a tile adhesive manufactured by Kerakoll, classified C2 TE S1. Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid. Allow 1 to 1.2 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 20 mm. Supplied in 25 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | H40 Gel |
|---|---|
| Manufacturer | Kerakoll |
| Type | Tile Adhesive |
| Classification | C2 TE S1 |
| Consumption | 1 to 1.2 kg/m2 per mm |
| Thickness | 2 to 20 mm |
| Pack size | 25 kg bags |
| Set time | 50 h |
| Pot life | 60 min |
| Open time | 20 min |
| Unit of measurement | m2 |
Frequently Asked Questions
H40 Gel is classified C2 TE S1 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.
As per the TDS: ≈ 1 - 1.2 kg/m² per mm of thickness
25 kg bags
You can download the official H40 Gel technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
Notched trowels comb the bed to an even depth, so the coverage under the tile is the coverage on the sheet.
View the range
Keiser
Mixing Applications
A paddle mix at the water ratio the sheet states is where the open time and the grab come from.
View the range
Peygran
Levelling
Levelling clips and wedges hold two tiles flush to each other while the adhesive sets.
View the range
Montolit
Masterpiuma P5
Cuts large format porcelain to the setting out line before the bed goes down.
View the range
H40 Gel in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of H40 Gel you need, or describe the job and we will work it out with you.