H40 Extreme tile adhesive pack
Kerakoll's own picture. The pack we stock: 10 kg.

Kerakoll Tile AdhesiveNo. 15 / 30

H40 Extreme Technical Data Sheet (TDS)

Hybrid, structural, multipurpose, extra-flexible, extra-workable Gel-Adhesive

Of the H40 gel adhesives, Extreme is the one built around working time. Kerakoll states a pot life of 110 minutes and an open time of 180 minutes, an unusually long window and the reason to specify it: a large format slab can still be adjusted well after placing, and a spread bed does not skin over before the tiler reaches the end of it.

  • Large format porcelain slabs
  • Laying ceramic tiles
  • Laying natural stone
  • Tiling in hot conditions
  • Work needing a long open time
Data sheet0.3 MB

Build a list across products and send it once, or ask about H40 Extreme on WhatsApp now.

Class
R2 T
Consumption
1.45 kg/m² per mm
Pack we stock
10 kg
Thickness
2 to 20 mm

About H40 Extreme

It is described as a hybrid, structural, multipurpose, extra flexible and extra workable gel adhesive for all types and sizes of porcelain, ceramic and natural stone, and it replaces Biogel Extreme. Shelf life is 24 months. The long open time is worth paying for on UAE sites in particular, where heat and air movement cut the practical life of a standard bed to a fraction of its stated figure.

Documentation

Related documentation

  • Technical data sheet

    0.3 MB · PDF

    H40 Extreme as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 20 mm.

As published in the data sheet

218kg

  • 1.45 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 22 packs of 10 kg monopack, 8.6 kg plus 1.4 kg

Send this quantity for a quote

Taken from the H40 Extreme data sheet: Coverage: approx. 1.45 kg/m2 per mm of thickness. Thickness from 2 to 20 mm. Rate is for the mixed A plus B product. No site allowance is added unless you turn one on. Two component sold as a single pack with part B inside it, 8.6 kg plus 1.4 kg, so the figure is for the mixed product and a pack is the whole 10 kg. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.

Application

Where it is used.

  1. 01Large format porcelain slabs
  2. 02Laying ceramic tiles
  3. 03Laying natural stone
  4. 04Tiling in hot conditions
  5. 05Work needing a long open time

Specification

Technical data.

  • R2 T
  • EN 12004 and ISO 13007
H40 Extreme technical specifications from the manufacturer TDS
Coverage≈ 1.45 kg/m² per mm of thickness
Pack sizemonopack 10 kg (8.6 +1.4 kg)
Pot life110 min
Open time180 min
Set to light foot traffic4 h
Mixing ratioPart A : Part B = 8.6 : 1.4
Application temperature+5 deg C to +40 deg C
ConsistencyPart A white paste / Part B white paste
Storage and shelf life24 months
Product typeHybrid, structural, multipurpose, extra-flexible, extra-workable Gel-Adhesive
Thickness2 to 20 mm

Typical values as Kerakoll prints them in the data sheet for H40 Extreme. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

monopack 10 kg (8.6 +1.4 kg). Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

Part A : Part B = 8.6 : 1.4. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

110 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply H40 Extreme, a tile adhesive manufactured by Kerakoll, classified R2 T. Hybrid, structural, multipurpose, extra-flexible, extra-workable Gel-Adhesive. Allow 1.45 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 20 mm. Mix at Part A : Part B = 8.6 : 1.4. Supplied in monopack 10 kg (8.6 +1.4 kg). Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for H40 Extreme
ProductH40 Extreme
ManufacturerKerakoll
TypeTile Adhesive
ClassificationR2 T
Consumption1.45 kg/m2 per mm
Thickness2 to 20 mm
Pack sizemonopack 10 kg (8.6 +1.4 kg)
Mixing ratioPart A : Part B = 8.6 : 1.4
Set time4 h
Pot life110 min
Open time180 min
Unit of measurementm2

Frequently Asked Questions

H40 Extreme is classified R2 T according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: ≈ 1.45 kg/m² per mm of thickness

monopack 10 kg (8.6 +1.4 kg)

You can download the official H40 Extreme technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

H40 Extreme in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of H40 Extreme you need, or describe the job and we will work it out with you.

Chat on WhatsApp