H40 Advanced tile adhesive pack
Kerakoll's own picture. The pack we stock: 25 kg.

Kerakoll Tile AdhesiveNo. 14 / 30

H40 Advanced Technical Data Sheet (TDS)

Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion

H40 Advanced is the fast setting member of the H40 gel adhesive range, classified C2F: improved adhesion with rapid setting. The F is the reason to choose it, because it allows grouting and foot traffic sooner than a standard adhesive, which matters when a tiling bay sits on the critical path.

  • Laying porcelain tiles
  • Laying ceramic tiles
  • Laying natural stone
  • Large format tile work
  • Fast track tiling programmes
Data sheet0.4 MB

Build a list across products and send it once, or ask about H40 Advanced on WhatsApp now.

Class
C2F
Consumption
1 to 1.2 kg/m² per mm
Pack we stock
25 kg
Thickness
2 to 20 mm

About H40 Advanced

Kerakoll describes it as structural, highly flexible and both thixotropic and fluid, suitable for all types and sizes of porcelain, ceramic and natural stone, and it replaces Biogel Revolution in the current range. Coverage is stated at 1 to 1.2 kg per square metre and pot life at 40 minutes, with a 12 month shelf life. Treat the 40 minutes as a planning limit. Mix only what the gang can lay inside it, and expect less in UAE summer conditions.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    H40 Advanced as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 20 mm.

As published in the data sheet

150 to 180kg

  • 1 to 1.2 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 6 to 8 packs of 25 kg bag

Send this quantity for a quote

Taken from the H40 Advanced data sheet: Coverage per mm of thickness (mixing): approx. 1 - 1.2 kg/m2. Adhesive thickness from 2 to 20 mm. No site allowance is added unless you turn one on. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.

Application

Where it is used.

  1. 01Laying porcelain tiles
  2. 02Laying ceramic tiles
  3. 03Laying natural stone
  4. 04Large format tile work
  5. 05Fast track tiling programmes

Where it is not the right product

  • On heated screeds or substrates that move, where an S1 or S2 deformable grade is required

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • C2F
  • EN 12004 and ISO 13007
H40 Advanced technical specifications from the manufacturer TDS
ClassificationC2F
Coverage1 - 1.2 kg/m2
Pack size25 kg
Pot life40 min
Set to light foot traffic3 h
Storage and shelf life12 months
Product typeMultipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion
Thickness2 to 20 mm

Typical values as Kerakoll prints them in the data sheet for H40 Advanced. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

40 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply H40 Advanced, a tile adhesive manufactured by Kerakoll, classified C2F. Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion. Allow 1 to 1.2 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 20 mm. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for H40 Advanced
ProductH40 Advanced
ManufacturerKerakoll
TypeTile Adhesive
ClassificationC2F
Consumption1 to 1.2 kg/m2 per mm
Thickness2 to 20 mm
Pack size25 kg
Set time3 h
Pot life40 min
Unit of measurementm2

Frequently Asked Questions

H40 Advanced is classified C2F according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: 1 - 1.2 kg/m2

25 kg

You can download the official H40 Advanced technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

H40 Advanced in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of H40 Advanced you need, or describe the job and we will work it out with you.

Chat on WhatsApp