Geolite Gel grout pack
Kerakoll's own picture. The pack we stock: 5 kg.

Kerakoll GroutNo. 13 / 30

Geolite Gel Technical Data Sheet (TDS)

Thixotropic adhesive, for structural bonding and grouting

Geolite Gel is a thixotropic adhesive for structural bonding and grouting, CE marked to EN 1504-4. That standard covers structural bonding for concrete, so this is a load bearing adhesive rather than a tiling product, used where a new element has to be bonded to existing concrete and the joint is expected to carry force.

  • Structural bonding to concrete
  • Grouting on concrete
  • Vertical and overhead bonding
  • Concrete repair to EN 1504-4
Data sheet0.4 MB

Build a list across products and send it once, or ask about Geolite Gel on WhatsApp now.

Class
EN 1504-4
Consumption
1.6 kg/m² per mm
Pack we stock
5 kg

About Geolite Gel

Thixotropic means it holds its shape once applied, which is what allows work on a vertical face or a soffit without the material slumping out of the joint. Pot life is stated as 100 minutes, the pack is a 5 kg bucket and shelf life is 12 months. Keep both components shaded before mixing. Pot life figures are quoted at laboratory temperature, and a resin mixed in UAE summer heat stiffens well before the stated time is up.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    Geolite Gel as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 1 to 10 mm.

As published in the data sheet

400kg

  • 1.6 kg/m2 per mm
  • 5 mm thick
  • over 50 m2

Order 61 packs of 6.66 kg kit, part A 5 kg plus part B 1.66 kg

Send this quantity for a quote

Taken from the Geolite Gel data sheet: Coverage: approx 1.6 kg/m2 per mm of thickness. No site allowance is added unless you turn one on. A thixotropic epoxy for structural bonding and bar grouting. The rate per millimetre applies to the bonded layer. The sheet gives no thickness range for coverage: the 10 mm bound is taken from its instruction to level surface irregularities greater than 10 mm with a Geolite geo mortar first, and the 5 mm starting point is not a sheet figure. For grouting bars the hole volume is the quantity, at a density of mixture of 1600 kg/m3.

Application

Where it is used.

  1. 01Structural bonding to concrete
  2. 02Grouting on concrete
  3. 03Vertical and overhead bonding
  4. 04Concrete repair to EN 1504-4

Where it is not the right product

  • Where the joint meets chemicals or constant water, which calls for an epoxy grout

Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.

Specification

Technical data.

  • EN 1504-4
  • EN 13888 and ISO 13007
Geolite Gel technical specifications from the manufacturer TDS
ClassificationEN 1504-4
Coverage≈ 1.6 kg/m² per mm of thickness
Pack size5 kg bucket
Pot life100 min
Mixing ratiopart A : part B = 3:1
Application temperaturefrom +5 °C to +35 °C
Consistencypart A grey paste / part B beige paste
Storage and shelf life12 months
Product typeThixotropic adhesive, for structural bonding and grouting

Typical values as Kerakoll prints them in the data sheet for Geolite Gel. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

5 kg bucket. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

part A : part B = 3:1. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

100 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Geolite Gel, a grout manufactured by Kerakoll, classified EN 1504-4. Thixotropic adhesive, for structural bonding and grouting. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at part A : part B = 3:1. Supplied in 5 kg bucket. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Geolite Gel
ProductGeolite Gel
ManufacturerKerakoll
TypeGrout
ClassificationEN 1504-4
Consumption1.6 kg/m2 per mm
Pack size5 kg bucket
Mixing ratiopart A : part B = 3:1
Pot life100 min
Unit of measurementm2

Frequently Asked Questions

Geolite Gel is classified EN 1504-4 according to EN 13888 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: ≈ 1.6 kg/m² per mm of thickness

5 kg bucket

You can download the official Geolite Gel technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Geolite Gel in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Geolite Gel you need, or describe the job and we will work it out with you.

Chat on WhatsApp