
Kerakoll GroutNo. 12 / 30
Fugalite Invisibile Technical Data Sheet (TDS)
Waterproof, photochromatic, decorative resin for the grouting and bonding of glass mosaic and low-thickness ceramic tiles
Glass mosaic and very thin ceramic set a problem no ordinary grout solves: the joint is visible through the tile, so its colour changes the look of the finished surface. Fugalite Invisibile answers that with a waterproof photochromatic decorative resin that grouts and bonds glass mosaic and low thickness ceramic, made to keep the surface reading as one continuous material rather than a grid of joints.
- Grouting glass mosaic
- Grouting low thickness ceramic
- Bonding glass mosaic
- Swimming pool and feature walls
- Joints where colour continuity matters
Build a list across products and send it once, or ask about Fugalite Invisibile on WhatsApp now.
- Consumption
- 0.182 kg/m² on a 600x600x10 mm tile at a 3 mm joint
- Pack we stock
- 2.82 kg
- Colour
- neutral
About Fugalite Invisibile
It is a resin system, so the joint is non porous and suits permanently wet areas such as pool and feature walls. Pot life is stated as 45 minutes and shelf life as 24 months. Because this product is chosen for appearance, build a small sample panel with the actual mosaic and have it signed off before the main area starts.
Documentation
Related documentation
Technical data sheet
0.4 MB · PDF
Fugalite Invisibile as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The tile thickness is the depth of the joint, which is why a 20 mm slab takes twice the grout of a 10 mm tile at the same joint width.
This manufacturer states its table already allows for normal site wastage, so adding more here is on top of theirs.
As published in the data sheet
9.10kg
- 600 x 600 x 10 mm tile, 3 mm joint
- 0.182 kg/m2 by the sheet's own formula
- over 50 m2
- The sheet states this already includes normal site wastage.
Order 4 packs of 3 kg monopack, part A 2.82 kg plus part B 0.18 kg
Taken from the Fugalite Invisibile data sheet: Coverage table, grammes/m2 by format, thickness and joint width: 60x60 cm at 10 mm thickness and a 3 mm joint prints approx 180 g/m2. The constant 1.820 is fitted to that table and reproduces 34 of the 54 printed cells at the printed step, with 45 of 54 within 3 percent and 51 of 54 within 5 percent. No site allowance is added unless you turn one on. This table is rounded coarsely, to the nearest 5 or 10 grammes, and its own rows imply constants from 1.75 to 1.88, so a single constant cannot reproduce every cell. The worst outlier is 30x60 cm at 4 mm thickness, printed as approx 40 g/m2 where the formula gives 36. The table states it already takes normal site wastage into account, which is why the figure sits well above the printed specific weight of the mixture of 1.55 kg/dm3. Joint width range is 0 to 3 mm. Used as an adhesive the consumption is approx 2 to 4 kg/m2 and the joint inputs do not apply.
Application
Where it is used.
- 01Grouting glass mosaic
- 02Grouting low thickness ceramic
- 03Bonding glass mosaic
- 04Swimming pool and feature walls
- 05Joints where colour continuity matters
Where it is not the right product
- Where the joint meets chemicals or constant water, which calls for an epoxy grout
Drawn from this product's own classification. If your situation is close to one of these, send us the detail and we will specify an alternative.
Specification
Technical data.
- EN 13888 and ISO 13007
| Coverage | - as an adhesive ≈ 2 - 4 kg/m² - as a grout see Coverage table |
|---|---|
| Pack size | 2.82 kg |
| Pot life | 5 min |
| Set to light foot traffic | 4 h |
| Colours | neutral |
| Mixing ratio | part A : part B = 2.82 : 0.18 |
| Application temperature | +5 deg C to +30 deg C |
| Consistency | part A neutral paste / part B straw-coloured liquid |
| Storage and shelf life | 24 months |
| Product type | Waterproof, photochromatic, decorative resin for the grouting and bonding of glass mosaic and low-thickness ceramic tiles |
| Thickness | as adhesive layer 0.9 ± 0.1 mm |
Typical values as Kerakoll prints them in the data sheet for Fugalite Invisibile. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
2.82 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
part A : part B = 2.82 : 0.18. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
5 min. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
24 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Fugalite Invisibile, a grout manufactured by Kerakoll. Waterproof, photochromatic, decorative resin for the grouting and bonding of glass mosaic and low-thickness ceramic tiles. Allow 0.182 kg/m2 on a 600x600x10 mm tile at a 3 mm joint, as published by the manufacturer. Applied thickness as adhesive layer 0.9 ± 0.1 mm. Mix at part A : part B = 2.82 : 0.18. Supplied in 2.82 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Fugalite Invisibile |
|---|---|
| Manufacturer | Kerakoll |
| Type | Grout |
| Consumption | 0.182 kg/m2 on a 600x600x10 mm tile at a 3 mm joint |
| Thickness | as adhesive layer 0.9 ± 0.1 mm |
| Pack size | 2.82 kg |
| Mixing ratio | part A : part B = 2.82 : 0.18 |
| Set time | 4 h |
| Pot life | 5 min |
| Unit of measurement | m2 |
Frequently Asked Questions
As per the TDS: - as an adhesive ≈ 2 - 4 kg/m² - as a grout see Coverage table
2.82 kg
You can download the official Fugalite Invisibile technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
On the van
Tools for this job.

Peygran
Cement Tools
A grouting float packs the joint without voids, and a cleaning float takes the haze off before it hardens.
View the range
Peygran
Spacers
The spacer sets the joint width, which decides the grout grade and how much of it the job takes.
View the range
Keiser
Mixing Applications
Mixing to the same water every time is what keeps the colour even from batch to batch.
View the range
Fugalite Invisibile in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Fugalite Invisibile you need, or describe the job and we will work it out with you.