
Kerakoll AccessoryNo. 19 / 30
Joint Technical Data Sheet (TDS)
Sub‑joint layer in closed‑cell, CFC‑ and HCFC‑free expanded polyethylene for static filling and dynamic joints with different degrees of expansion
Joint is neither an adhesive nor a grout but the compressible layer that goes into a movement joint before it is sealed. It is made of closed cell expanded polyethylene, free of CFCs and HCFCs, and is supplied in different degrees of expansion so it serves both as static filling and in joints that have to move.
- Backing static filling joints
- Backing dynamic movement joints
- Controlling sealant depth
- Perimeter joints in wet areas
- Terrace and facade movement joints
Build a list across products and send it once, or ask about Joint on WhatsApp now.
About Joint
Closed cell is the important property, because the material does not take up water, so it keeps working in a wet area and does not hold moisture against the sealant. Its other job is to control sealant depth, which is what lets a sealed joint stretch properly instead of splitting. On a UAE terrace or facade the movement joints are where tiling fails first, so size and place these before tiling starts rather than filling the gap afterwards.
Documentation
Related documentation
Technical data sheet
Issued by the manufacturer to its dealers. We hold the current revision and will send it straight back.
RequestSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Application
Where it is used.
- 01Backing static filling joints
- 02Backing dynamic movement joints
- 03Controlling sealant depth
- 04Perimeter joints in wet areas
- 05Terrace and facade movement joints
Specification
Technical data.
| Product type | Sub‑joint layer in closed‑cell, CFC‑ and HCFC‑free expanded polyethylene for static filling and dynamic joints with different degrees of expansion |
|---|
Typical values as Kerakoll prints them in the data sheet for Joint. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
For quantity surveyors
BOQ clause.
Supply and apply Joint, a accessory manufactured by Kerakoll. Sub‑joint layer in closed‑cell, CFC‑ and HCFC‑free expanded polyethylene for static filling and dynamic joints with different degrees of expansion. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Joint |
|---|---|
| Manufacturer | Kerakoll |
| Type | Accessory |
| Unit of measurement | m2 |
Frequently Asked Questions
You can download the official Joint technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Biogel Extreme
R2
View TDS and specifications

Biogel No Limits
C2 TE S1
View TDS and specifications

Delta Plus
View TDS and specifications

Epofill
EN 1504-5
View TDS and specifications

Fuga-Remove
View TDS and specifications

Fuga-Shock
View TDS and specifications
All Tile Adhesives and GroutsEvery Kerakoll product and the distributor page
Joint in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of Joint you need, or describe the job and we will work it out with you.