H40 Tech tile adhesive pack
Kerakoll's own picture. The pack we stock: 20 kg.

Kerakoll Tile AdhesiveNo. 18 / 30

H40 Tech Technical Data Sheet (TDS)

Multipurpose, ultra-flexible, structural gel-adhesive, thixo & fluid

H40 Tech carries the highest deformability in the range, classified C2 TE S2. S2 is the specification that separates it from a standard C2 adhesive: the hardened bed accommodates substrate movement that would crack a rigid one, which is why an S2 grade is called for over heated screeds, on tile over tile work and under large heavy slabs on external elevations.

  • Tiling over heated screeds
  • Tile over tile work
  • Large format heavy slabs
  • External elevations
  • Laying porcelain and natural stone
Data sheet0.4 MB

Build a list across products and send it once, or ask about H40 Tech on WhatsApp now.

Class
C2 TE S2
Consumption
1 to 1.2 kg/m² per mm
Pack we stock
20 kg
Colour
Grey pre-mixed powder

About H40 Tech

Kerakoll describes it as a multipurpose, ultra flexible, structural gel adhesive, thixotropic and fluid, and the T and E in the code mean no vertical slip and extended open time. Supplied in 20 kg bags with a pot life of 5 hours and a 12 month shelf life. Note the bag size, because it differs from the 25 kg bags used elsewhere in the H40 range and changes how a bulk order is calculated.

Documentation

Related documentation

  • Technical data sheet

    0.4 MB · PDF

    H40 Tech as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 20 mm.

As published in the data sheet

150 to 180kg

  • 1 to 1.2 kg/m2 per mm
  • 3 mm thick
  • over 50 m2

Order 8 to 9 packs of 20 kg bag

Send this quantity for a quote

Taken from the H40 Tech data sheet: Coverage: approx. 1 - 1.2 kg/m2 per mm of thickness. Thickness from 2 to 20 mm. No site allowance is added unless you turn one on. Values taken at +23 C, 50 percent relative humidity and no ventilation. The sheet says the figure can vary with site temperature, ventilation, substrate absorbency and the format of the tile.

Application

Where it is used.

  1. 01Tiling over heated screeds
  2. 02Tile over tile work
  3. 03Large format heavy slabs
  4. 04External elevations
  5. 05Laying porcelain and natural stone

Specification

Technical data.

  • C2 TE S2
  • EN 12004 and ISO 13007
H40 Tech technical specifications from the manufacturer TDS
ClassificationC2 TE S2
Coverage≈ 1 - 1.2 kg/m² per mm of thickness
Pack size20 kg bags
Pot life5 h
Open time60 min
Set to light foot traffic24 h
ColoursGrey pre-mixed powder
Application temperature+5 deg C to +40 deg C
ConsistencyGrey pre-mixed powder
Storage and shelf life12 months
Product typeMultipurpose, ultra-flexible, structural gel-adhesive, thixo & fluid
Thickness2 to 20 mm

Typical values as Kerakoll prints them in the data sheet for H40 Tech. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

20 kg bags. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Working time

5 h. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

12 months in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply H40 Tech, a tile adhesive manufactured by Kerakoll, classified C2 TE S2. Multipurpose, ultra-flexible, structural gel-adhesive, thixo & fluid. Allow 1 to 1.2 kg/m2 per mm, as published by the manufacturer. Applied thickness 2 to 20 mm. Supplied in 20 kg bags. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for H40 Tech
ProductH40 Tech
ManufacturerKerakoll
TypeTile Adhesive
ClassificationC2 TE S2
Consumption1 to 1.2 kg/m2 per mm
Thickness2 to 20 mm
Pack size20 kg bags
Set time24 h
Pot life5 h
Open time60 min
Unit of measurementm2

Frequently Asked Questions

H40 Tech is classified C2 TE S2 according to EN 12004 and ISO 13007, as stated in the manufacturer's technical data sheet.

As per the TDS: ≈ 1 - 1.2 kg/m² per mm of thickness

20 kg bags

You can download the official H40 Tech technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

H40 Tech in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Kerakoll from Dubai, Abu Dhabi and Sharjah. Send the quantity of H40 Tech you need, or describe the job and we will work it out with you.

Chat on WhatsApp